Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic Synopsys DW-HDMI specifics over to YAML schemas.
The original example and usage of clock-names uses a reversed "isfr"
and "iahb" clock-names, the rewritten YAML bindings uses the reversed
instead of fixing the device trees order.
The #sound-dai-cells optional property has been added to match this node
as a sound dai.
The port connection table has been dropped in favor of a description
of each port.
Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
---
.../display/amlogic,meson-dw-hdmi.txt | 119 --------------
.../display/amlogic,meson-dw-hdmi.yaml | 150 ++++++++++++++++++
2 files changed, 150 insertions(+), 119 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
create mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
deleted file mode 100644
index 3a50a7862cf3..000000000000
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-Amlogic specific extensions to the Synopsys Designware HDMI Controller
-======================================================================
-
-The Amlogic Meson Synopsys Designware Integration is composed of :
-- A Synopsys DesignWare HDMI Controller IP
-- A TOP control block controlling the Clocks and PHY
-- A custom HDMI PHY in order to convert video to TMDS signal
- ___________________________________
-| HDMI TOP |<= HPD
-|___________________________________|
-| | |
-| Synopsys HDMI | HDMI PHY |=> TMDS
-| Controller |________________|
-|___________________________________|<=> DDC
-
-The HDMI TOP block only supports HPD sensing.
-The Synopsys HDMI Controller interrupt is routed through the
-TOP Block interrupt.
-Communication to the TOP Block and the Synopsys HDMI Controller is done
-via a pair of dedicated addr+read/write registers.
-The HDMI PHY is configured by registers in the HHI register block.
-
-Pixel data arrives in 4:4:4 format from the VENC block and the VPU HDMI mux
-selects either the ENCI encoder for the 576i or 480i formats or the ENCP
-encoder for all the other formats including interlaced HD formats.
-
-The VENC uses a DVI encoder on top of the ENCI or ENCP encoders to generate
-DVI timings for the HDMI controller.
-
-Amlogic Meson GXBB, GXL and GXM SoCs families embeds the Synopsys DesignWare
-HDMI TX IP version 2.01a with HDCP and I2C & S/PDIF
-audio source interfaces.
-
-Required properties:
-- compatible: value should be different for each SoC family as :
- - GXBB (S905) : "amlogic,meson-gxbb-dw-hdmi"
- - GXL (S905X, S905D) : "amlogic,meson-gxl-dw-hdmi"
- - GXM (S912) : "amlogic,meson-gxm-dw-hdmi"
- followed by the common "amlogic,meson-gx-dw-hdmi"
- - G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-dw-hdmi"
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The HDMI interrupt number
-- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
- and the Amlogic Meson venci clocks as described in
- Documentation/devicetree/bindings/clock/clock-bindings.txt,
- the clocks are soc specific, the clock-names should be "iahb", "isfr", "venci"
-- resets, resets-names: must have the phandles to the HDMI apb, glue and phy
- resets as described in :
- Documentation/devicetree/bindings/reset/reset.txt,
- the reset-names should be "hdmitx_apb", "hdmitx", "hdmitx_phy"
-
-Optional properties:
-- hdmi-supply: Optional phandle to an external 5V regulator to power the HDMI
- logic, as described in the file ../regulator/regulator.txt
-
-Required nodes:
-
-The connections to the HDMI ports are modeled using the OF graph
-bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-The following table lists for each supported model the port number
-corresponding to each HDMI output and input.
-
- Port 0 Port 1
------------------------------------------
- S905 (GXBB) VENC Input TMDS Output
- S905X (GXL) VENC Input TMDS Output
- S905D (GXL) VENC Input TMDS Output
- S912 (GXM) VENC Input TMDS Output
- S905X2 (G12A) VENC Input TMDS Output
- S905Y2 (G12A) VENC Input TMDS Output
- S905D2 (G12A) VENC Input TMDS Output
-
-Example:
-
-hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
-};
-
-hdmi_tx: hdmi-tx@c883a000 {
- compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
- reg = <0x0 0xc883a000 0x0 0x1c>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
- resets = <&reset RESET_HDMITX_CAPB3>,
- <&reset RESET_HDMI_SYSTEM_RESET>,
- <&reset RESET_HDMI_TX>;
- reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
- clocks = <&clkc CLKID_HDMI_PCLK>,
- <&clkc CLKID_CLK81>,
- <&clkc CLKID_GCLK_VENCI_INT0>;
- clock-names = "isfr", "iahb", "venci";
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* VPU VENC Input */
- hdmi_tx_venc_port: port@0 {
- reg = <0>;
-
- hdmi_tx_in: endpoint {
- remote-endpoint = <&hdmi_tx_out>;
- };
- };
-
- /* TMDS Output */
- hdmi_tx_tmds_port: port@1 {
- reg = <1>;
-
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
new file mode 100644
index 000000000000..fb747682006d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
+
+maintainers:
+ - Neil Armstrong <narmstrong@xxxxxxxxxxxx>
+
+description: |
+ The Amlogic Meson Synopsys Designware Integration is composed of
+ - A Synopsys DesignWare HDMI Controller IP
+ - A TOP control block controlling the Clocks and PHY
+ - A custom HDMI PHY in order to convert video to TMDS signal
+ ___________________________________
+ | HDMI TOP |<= HPD
+ |___________________________________|
+ | | |
+ | Synopsys HDMI | HDMI PHY |=> TMDS
+ | Controller |________________|
+ |___________________________________|<=> DDC
+
+ The HDMI TOP block only supports HPD sensing.
+ The Synopsys HDMI Controller interrupt is routed through the
+ TOP Block interrupt.
+ Communication to the TOP Block and the Synopsys HDMI Controller is done
+ via a pair of dedicated addr+read/write registers.
+ The HDMI PHY is configured by registers in the HHI register block.
+
+ Pixel data arrives in "4:4:4" format from the VENC block and the VPU HDMI mux
+ selects either the ENCI encoder for the 576i or 480i formats or the ENCP
+ encoder for all the other formats including interlaced HD formats.
+
+ The VENC uses a DVI encoder on top of the ENCI or ENCP encoders to generate
+ DVI timings for the HDMI controller.
+
+ Amlogic Meson GXBB, GXL and GXM SoCs families embeds the Synopsys DesignWare
+ HDMI TX IP version 2.01a with HDCP and I2C & S/PDIF
+ audio source interfaces.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,meson-gxbb-dw-hdmi # GXBB (S905)
+ - amlogic,meson-gxl-dw-hdmi # GXL (S905X, S905D)
+ - amlogic,meson-gxm-dw-hdmi # GXM (S912)
+ - const: amlogic,meson-gx-dw-hdmi
+ - enum:
+ - amlogic,meson-g12a-dw-hdmi # G12A (S905X2, S905Y2, S905D2)
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+
+ clock-names:
+ items:
+ - const: isfr
+ - const: iahb
+ - const: venci
+
+ resets:
+ minItems: 3
+
+ reset-names:
+ items:
+ - const: hdmitx_apb
+ - const: hdmitx
+ - const: hdmitx_phy
+
+ hdmi-supply:
+ description: phandle to an external 5V regulator to power the HDMI logic
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle
+
+ port@0:
+ type: object
+ description:
+ A port node pointing to the VENC Input port node.
+
+ port@1:
+ type: object
+ description:
+ A port node pointing to the TMDS Output port node.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - port@0
+ - port@1
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ hdmi_tx: hdmi-tx@c883a000 {
+ compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+ reg = <0xc883a000 0x1c>;
+ interrupts = <57>;
+ resets = <&reset_apb>, <&reset_hdmitx>, <&reset_hdmitx_phy>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clk_isfr>, <&clk_iahb>, <&clk_venci>;
+ clock-names = "isfr", "iahb", "venci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VPU VENC Input */
+ hdmi_tx_venc_port: port@0 {
+ reg = <0>;
+
+ hdmi_tx_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+
+ /* TMDS Output */
+ hdmi_tx_tmds_port: port@1 {
+ reg = <1>;
+
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+
--
2.22.0
