On 05.08.2019 18:54, Alexandru Ardelean wrote:
> Down-speed auto-negotiation may not always be enabled, in which case the
> PHY won't down-shift to 100 or 10 during auto-negotiation.
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> ---
> drivers/net/phy/adin.c | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
> index 86848444bd98..a1f3456a8504 100644
> --- a/drivers/net/phy/adin.c
> +++ b/drivers/net/phy/adin.c
> @@ -32,6 +32,13 @@
> #define ADIN1300_NRG_PD_TX_EN BIT(2)
> #define ADIN1300_NRG_PD_STATUS BIT(1)
>
> +#define ADIN1300_PHY_CTRL2 0x0016
> +#define ADIN1300_DOWNSPEED_AN_100_EN BIT(11)
> +#define ADIN1300_DOWNSPEED_AN_10_EN BIT(10)
> +#define ADIN1300_GROUP_MDIO_EN BIT(6)
> +#define ADIN1300_DOWNSPEEDS_EN \
> + (ADIN1300_DOWNSPEED_AN_100_EN | ADIN1300_DOWNSPEED_AN_10_EN)
> +
> #define ADIN1300_INT_MASK_REG 0x0018
> #define ADIN1300_INT_MDIO_SYNC_EN BIT(9)
> #define ADIN1300_INT_ANEG_STAT_CHNG_EN BIT(8)
> @@ -425,6 +432,22 @@ static int adin_config_mdix(struct phy_device *phydev)
> return phy_write(phydev, ADIN1300_PHY_CTRL1, reg);
> }
>
> +static int adin_config_downspeeds(struct phy_device *phydev)
> +{
> + int reg;
> +
> + reg = phy_read(phydev, ADIN1300_PHY_CTRL2);
> + if (reg < 0)
> + return reg;
> +
> + if ((reg & ADIN1300_DOWNSPEEDS_EN) == ADIN1300_DOWNSPEEDS_EN)
> + return 0;
> +
> + reg |= ADIN1300_DOWNSPEEDS_EN;
> +
> + return phy_write(phydev, ADIN1300_PHY_CTRL2, reg);
Using phy_set_bits() would be easier.
> +}
> +
> static int adin_config_aneg(struct phy_device *phydev)
> {
> int ret;
> @@ -433,6 +456,10 @@ static int adin_config_aneg(struct phy_device *phydev)
> if (ret)
> return ret;
>
> + ret = adin_config_downspeeds(phydev);
> + if (ret < 0)
> + return ret;
> +
> return genphy_config_aneg(phydev);
> }
>
>
