From: Rob Clark <robdclark@xxxxxxxxx>
Add support to restore the secure configuration for qcm_scm-32.c. This
is needed by the On Chip MEMory (OCMEM) that is present on some
Snapdragon devices.
Signed-off-by: Rob Clark <robdclark@xxxxxxxxx>
[masneyb@xxxxxxxxxxxxx: ported to latest kernel; set ctx_bank_num to
spare parameter.]
Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
---
Changes since v4:
- None
Changes since v3:
- None
Changes since v2:
- None
Changes since v1:
- Use existing __qcom_scm_restore_sec_cfg() function stub in
qcom_scm-32.c that was unimplemented
- Set the cfg.ctx_bank_num to the spare function parameter. It was
previously set to the device_id.
drivers/firmware/qcom_scm-32.c | 17 ++++++++++++++++-
drivers/firmware/qcom_scm.c | 13 +++++++++++++
include/linux/qcom_scm.h | 11 +++++++++++
3 files changed, 40 insertions(+), 1 deletion(-)
diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index 4c2514e5e249..5d90b7f5ab5a 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -617,7 +617,22 @@ int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
u32 spare)
{
- return -ENODEV;
+ struct msm_scm_sec_cfg {
+ __le32 id;
+ __le32 ctx_bank_num;
+ } cfg;
+ int ret, scm_ret = 0;
+
+ cfg.id = cpu_to_le32(device_id);
+ cfg.ctx_bank_num = cpu_to_le32(spare);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_RESTORE_SEC_CFG,
+ &cfg, sizeof(cfg), &scm_ret, sizeof(scm_ret));
+
+ if (ret || scm_ret)
+ return ret ? ret : -EINVAL;
+
+ return 0;
}
int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 7e285ff3961d..27c1d98a34e6 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -367,6 +367,19 @@ static const struct reset_control_ops qcom_scm_pas_reset_ops = {
.deassert = qcom_scm_pas_reset_deassert,
};
+/**
+ * qcom_scm_restore_sec_cfg_available() - Check if secure environment
+ * supports restore security config interface.
+ *
+ * Return true if restore-cfg interface is supported, false if not.
+ */
+bool qcom_scm_restore_sec_cfg_available(void)
+{
+ return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_MP,
+ QCOM_SCM_RESTORE_SEC_CFG);
+}
+EXPORT_SYMBOL(qcom_scm_restore_sec_cfg_available);
+
int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
{
return __qcom_scm_restore_sec_cfg(__scm->dev, device_id, spare);
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index b49b734d662c..04382e1798e4 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -34,6 +34,16 @@ enum qcom_scm_ocmem_client {
QCOM_SCM_OCMEM_DEBUG_ID,
};
+enum qcom_scm_sec_dev_id {
+ QCOM_SCM_MDSS_DEV_ID = 1,
+ QCOM_SCM_OCMEM_DEV_ID = 5,
+ QCOM_SCM_PCIE0_DEV_ID = 11,
+ QCOM_SCM_PCIE1_DEV_ID = 12,
+ QCOM_SCM_GFX_DEV_ID = 18,
+ QCOM_SCM_UFS_DEV_ID = 19,
+ QCOM_SCM_ICE_DEV_ID = 20,
+};
+
#define QCOM_SCM_VMID_HLOS 0x3
#define QCOM_SCM_VMID_MSS_MSA 0xF
#define QCOM_SCM_VMID_WLAN 0x18
@@ -70,6 +80,7 @@ extern int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
extern void qcom_scm_cpu_power_down(u32 flags);
extern u32 qcom_scm_get_version(void);
extern int qcom_scm_set_remote_state(u32 state, u32 id);
+extern bool qcom_scm_restore_sec_cfg_available(void);
extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
--
2.21.0
