Now that we have the DT validation in place, let's convert the device tree bindings for the Amlogic G12A USB2 PHY over to a YAML schemas. While the original phy bindings specifies phy-supply as required, the examples and implementations makes it optional, thus phy-supply is not in the required list of attributes. Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> --- .../phy/amlogic,meson-g12a-usb2-phy.yaml | 63 +++++++++++++++++++ .../bindings/phy/meson-g12a-usb2-phy.txt | 22 ------- 2 files changed, 63 insertions(+), 22 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml new file mode 100644 index 000000000000..51254b4e65dd --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb2-phy.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: Amlogic G12A USB2 PHY + +maintainers: + - Neil Armstrong <narmstrong@xxxxxxxxxxxx> + +properties: + compatible: + enum: + - amlogic,meson-g12a-usb2-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: xtal + + resets: + maxItems: 1 + + reset-names: + items: + - const: phy + + "#phy-cells": + const: 0 + + phy-supply: + maxItems: 1 + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - "#phy-cells" + +examples: + - | + phy@36000 { + compatible = "amlogic,meson-g12a-usb2-phy"; + reg = <0x36000 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&phy_reset>; + reset-names = "phy"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt deleted file mode 100644 index a6ebc3dea159..000000000000 --- a/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Amlogic G12A USB2 PHY binding - -Required properties: -- compatible: Should be "amlogic,meson-g12a-usb2-phy" -- reg: The base address and length of the registers -- #phys-cells: must be 0 (see phy-bindings.txt in this directory) -- clocks: a phandle to the clock of this PHY -- clock-names: must be "xtal" -- resets: a phandle to the reset line of this PHY -- reset-names: must be "phy" -- phy-supply: see phy-bindings.txt in this directory - -Example: - usb2_phy0: phy@36000 { - compatible = "amlogic,g12a-usb2-phy"; - reg = <0x0 0x36000 0x0 0x2000>; - clocks = <&xtal>; - clock-names = "xtal"; - resets = <&reset RESET_USB_PHY21>; - reset-names = "phy"; - #phy-cells = <0>; - }; -- 2.22.0
