On 01.08.2019 21:07, Matthias Kaehlcke wrote:
> The RTL8211E has extension pages, which can be accessed after
> selecting a page through a custom method. Add a function to
> modify bits in a register of an extension page and a helper for
> selecting an ext page. Use rtl8211e_modify_ext_paged() in
> rtl8211e_config_init() instead of doing things 'manually'.
>
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> ---
> Changes in v4:
> - don't add constant RTL8211E_EXT_PAGE, it's only used once,
> use a literal instead
> - pass 'oldpage' to phy_restore_page() in rtl8211e_select_ext_page(),
> not 'page'
> - return 'oldpage' in rtl8211e_select_ext_page()
> - use __phy_modify() in rtl8211e_modify_ext_paged() instead of
> reimplementing __phy_modify_changed()
> - in rtl8211e_modify_ext_paged() return directly when
> rtl8211e_select_ext_page() fails
> ---
> drivers/net/phy/realtek.c | 48 +++++++++++++++++++++++++++------------
> 1 file changed, 34 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> index a669945eb829..e09d3b0da2c7 100644
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -53,6 +53,36 @@ static int rtl821x_write_page(struct phy_device *phydev, int page)
> return __phy_write(phydev, RTL821x_PAGE_SELECT, page);
> }
>
> +static int rtl8211e_select_ext_page(struct phy_device *phydev, int page)
The "extended page" mechanism doesn't exist on RTL8211E only. A prefix
rtl821x like in other functions may be better therefore.
> +{
> + int ret, oldpage;
> +
> + oldpage = phy_select_page(phydev, 7);
> + if (oldpage < 0)
> + return oldpage;
> +
> + ret = __phy_write(phydev, RTL821x_EXT_PAGE_SELECT, page);
> + if (ret)
> + return phy_restore_page(phydev, oldpage, ret);
> +
> + return oldpage;
> +}
> +
> +static int rtl8211e_modify_ext_paged(struct phy_device *phydev, int page,
> + u32 regnum, u16 mask, u16 set)
> +{
> + int ret = 0;
> + int oldpage;
> +
> + oldpage = rtl8211e_select_ext_page(phydev, page);
> + if (oldpage < 0)
> + return oldpage;
> +
> + ret = __phy_modify(phydev, regnum, mask, set);
> +
> + return phy_restore_page(phydev, oldpage, ret);
> +}
> +
> static int rtl8201_ack_interrupt(struct phy_device *phydev)
> {
> int err;
> @@ -184,7 +214,7 @@ static int rtl8211f_config_init(struct phy_device *phydev)
>
> static int rtl8211e_config_init(struct phy_device *phydev)
> {
> - int ret = 0, oldpage;
> + int ret;
> u16 val;
>
> /* enable TX/RX delay for rgmii-* modes, and disable them for rgmii. */
> @@ -213,19 +243,9 @@ static int rtl8211e_config_init(struct phy_device *phydev)
> * 2 = RX Delay, 1 = TX Delay, 0 = SELRGV (see original PHY datasheet
> * for details).
> */
> - oldpage = phy_select_page(phydev, 0x7);
> - if (oldpage < 0)
> - goto err_restore_page;
> -
> - ret = __phy_write(phydev, RTL821x_EXT_PAGE_SELECT, 0xa4);
> - if (ret)
> - goto err_restore_page;
> -
> - ret = __phy_modify(phydev, 0x1c, RTL8211E_TX_DELAY | RTL8211E_RX_DELAY,
> - val);
> -
> -err_restore_page:
> - return phy_restore_page(phydev, oldpage, ret);
> + return rtl8211e_modify_ext_paged(phydev, 0xa4, 0x1c,
> + RTL8211E_TX_DELAY | RTL8211E_RX_DELAY,
> + val);
> }
>
> static int rtl8211b_suspend(struct phy_device *phydev)
>
