Am Mittwoch, 31. Juli 2019, 17:15:27 CEST schrieb Matthias Kaehlcke:
> Fix/improve a few things for veyron fievel/tiger:
>
> - move 'vccsys' regulator from tiger to fievel, both boards
> have it (and tiger includes the fievel .dtsi)
> - move 'ext_gmac' node below regulators
> - fix GPIO ids of vcc5_host1 and vcc5_host2 regulators
> - remove reset configuration from 'gmac' node, this is already done
> in rk3288.dtsi
> - fixed style issues of some multi-line comments
> - switch 'vcc18_lcdt', 'vdd10_lcd' and 'vcc33_ccd' regulators off
> during suspend
> - no pull-up on the Bluetooth wake-up pin, there is an external
> pull-up. The signal is active low, add the 'bt_host_wake_l'
> pinctrl config
> - move BC 1.2 pins up in the pinctrl config to keep 'wake only' pins
> separate
> - add BC 1.2 pins to sleep config
>
> Fixes: 0067692b662e ("ARM: dts: rockchip: add veyron-fievel board")
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
applied for 5.4
Thanks
Heiko
