On Thu, Jul 25, 2019 at 06:18:32PM +0300, Dmitry Osipenko wrote:
> Add regulators coupler for Tegra30 SoCs that performs voltage balancing
> of a coupled regulators and thus provides voltage scaling functionality.
>
> There are 2 coupled regulators on all Tegra30 SoCs: CORE and CPU. The
> coupled regulator voltages shall be in a range of 300mV from each other
> and CORE voltage shall be higher than the CPU by N mV, where N depends
> on the CPU voltage.
>
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> ---
> drivers/soc/tegra/Kconfig | 4 +
> drivers/soc/tegra/Makefile | 1 +
> drivers/soc/tegra/regulators-tegra30.c | 316 +++++++++++++++++++++++++
> 3 files changed, 321 insertions(+)
> create mode 100644 drivers/soc/tegra/regulators-tegra30.c
>
...
> +
> +static int tegra30_core_cpu_limit(int cpu_uV)
> +{
> + if (cpu_uV < 800000)
> + return 950000;
> +
> + if (cpu_uV < 900000)
> + return 1000000;
> +
> + if (cpu_uV < 1000000)
> + return 1100000;
> +
> + if (cpu_uV < 1100000)
> + return 1200000;
> +
> + if (cpu_uV < 1250000) {
> + switch (tegra_sku_info.cpu_speedo_id) {
> + case 0 ... 1:
Aren't we supposed to add /* fall through */ here now?
> + case 4:
> + case 7 ... 8:
> + return 1200000;
> +
> + default:
> + return 1300000;
> + }
> + }
> +
Other than that, this looks ok to me.
Peter.
