[PATCH/RFC 02/12] dt-bindings: display: renesas: lvds: Document renesas,swap-data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



R-Car D3, R-Car E3, and RZ/G2E support dual-link mode.
In such a mode, the first LVDS encoder emits even data, and the
second LVDS encoder emits odd data. This patch documents property
renesas,swap-data, used to swap even and odd data around.

Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
index dece79e..8980179 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
@@ -52,6 +52,11 @@ Optional properties:
   mandatory for the first LVDS encoder on R-Car D3, R-Car E3, and RZ/G2E SoCs,
   and shall point to the second encoder to be used as a companion in dual-link
   mode. It shall not be set for any other LVDS encoder.
+- renesas,swap-data : when in dual-link mode, the first LVDS encoder normally
+  emits even data, and the second LVDS encoder emits odd data. When property
+  renesas,swap-data is specified, the data emitted by the two encoders will be
+  swapped around. This property can only be used in conjunction with property
+  renesas,companion.
 
 
 Example:
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux