Move the native-mode property inside the display-timings node.
According to
Documentation/devicetree/bindings/display/panel/display-timing.txt.
native-mode is a property of the display-timings node.
If it's located outside of display-timings, the native-mode setting is
ignored and the first display timing is used (which is a problem only if
someone adds another display timing).
Signed-off-by: Martin Kaiser <martin@xxxxxxxxx>
---
arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index ad2f7e879831..80a7f96de4c6 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -14,8 +14,8 @@
bits-per-pixel = <16>;
fsl,pcr = <0xfa208b80>;
bus-width = <18>;
- native-mode = <&dvi_svga_timings>;
display-timings {
+ native-mode = <&dvi_svga_timings>;
dvi_svga_timings: 800x600 {
clock-frequency = <40000000>;
hactive = <800>;
--
2.11.0
