Move the native-mode property inside the display-timings node.
According to
Documentation/devicetree/bindings/display/panel/display-timing.txt.
native-mode is a property of the display-timings node.
If it's located outside of display-timings, the native-mode setting is
ignored and the first display timing is used (which is a problem only if
someone adds another display timing).
Signed-off-by: Martin Kaiser <martin@xxxxxxxxx>
---
arch/arm/boot/dts/imx27-apf27dev.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
index 087c6e237af0..6f1e8ce9e76e 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -12,10 +12,10 @@
display: display {
model = "Chimei-LW700AT9003";
- native-mode = <&timing0>;
bits-per-pixel = <16>; /* non-standard but required */
fsl,pcr = <0xfae80083>; /* non-standard but required */
display-timings {
+ native-mode = <&timing0>;
timing0: 800x480 {
clock-frequency = <33000033>;
hactive = <800>;
--
2.11.0
