On Thu, Aug 1, 2019 at 7:56 AM Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote:
>
> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> ---
> .../bindings/phy/meson-g12a-usb3-pcie-phy.txt | 22 -------
> .../phy/meson-g12a-usb3-pcie-phy.yaml | 61 +++++++++++++++++++
> 2 files changed, 61 insertions(+), 22 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
> deleted file mode 100644
> index 7cfc17e2df31..000000000000
> --- a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
> +++ /dev/null
> @@ -1,22 +0,0 @@
> -* Amlogic G12A USB3 + PCIE Combo PHY binding
> -
> -Required properties:
> -- compatible: Should be "amlogic,meson-g12a-usb3-pcie-phy"
> -- #phys-cells: must be 1. The cell number is used to select the phy mode
> - as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE
> -- reg: The base address and length of the registers
> -- clocks: a phandle to the 100MHz reference clock of this PHY
> -- clock-names: must be "ref_clk"
> -- resets: phandle to the reset lines for the PHY control
> -- reset-names: must be "phy"
> -
> -Example:
> - usb3_pcie_phy: phy@46000 {
> - compatible = "amlogic,g12a-usb3-pcie-phy";
> - reg = <0x0 0x46000 0x0 0x2000>;
> - clocks = <&clkc CLKID_PCIE_PLL>;
> - clock-names = "ref_clk";
> - resets = <&reset RESET_PCIE_PHY>;
> - reset-names = "phy";
> - #phy-cells = <1>;
> - };
> diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml
> new file mode 100644
> index 000000000000..fe4df6bd51b2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019 BayLibre, SAS
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/meson-g12a-usb3-pcie-phy.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Amlogic G12A USB3 + PCIE Combo PHY
> +
> +maintainers:
> + - Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> +
> +properties:
> + compatible:
> + enum:
> + - amlogic,g12a-usb3-pcie-phy
Wrong compatible string.
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> + description:
> + A phandle to the clock of this PHY
> +
> + clock-names:
> + items:
> + - const: ref_clk
> +
> + resets:
> + maxItems: 1
> + description:
> + A phandle to the reset line of this PHY
> +
> + reset-names:
> + items:
> + - const: phy
> +
> + "#phy-cells":
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> + - "#phy-cells"
> +
> +examples:
> + - |
> + phy@46000 {
> + compatible = "amlogic,meson-g12a-usb3-pcie-phy";
> + reg = <0x46000 0x2000>;
> + clocks = <&ref_clk>;
> + clock-names = "ref_clk";
> + resets = <&phy_reset>;
> + reset-names = "phy";
> + #phy-cells = <1>;
> + };
> --
> 2.22.0
>
