Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> --- .../bindings/spi/amlogic,meson-gx-spicc.yaml | 74 +++++++++++++++++++ .../bindings/spi/amlogic,meson6-spifc.yaml | 57 ++++++++++++++ .../devicetree/bindings/spi/spi-meson.txt | 55 -------------- 3 files changed, 131 insertions(+), 55 deletions(-) create mode 100644 Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml create mode 100644 Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml delete mode 100644 Documentation/devicetree/bindings/spi/spi-meson.txt diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml new file mode 100644 index 000000000000..6e2c41c730b5 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/spi/amlogic,meson-gx-spicc.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: Amlogic Meson SPI Communication Controller + +maintainers: + - Neil Armstrong <narmstrong@xxxxxxxxxxxx> + +allOf: + - $ref: "spi-controller.yaml#" + +description: | + The Meson SPICC is a generic SPI controller for general purpose Full-Duplex + communications with dedicated 16 words RX/TX PIO FIFOs. + +properties: + compatible: + oneOf: + - description: SPICC controller on Amlogic GX and compatible SoCs + enum: + - amlogic,meson-gx-spicc + - description: SPICC controller on Amlogic AXG and compatible SoCs + enum: + - amlogic,meson-axg-spicc + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + resets: + description: phandle of the internal reset line + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: input clock for the baud rate generator + items: + - const: core + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - "#address-cells" + - "#size-cells" + +examples: + - | + spi@c1108d80 { + compatible = "amlogic,meson-gx-spicc"; + reg = <0xc1108d80 0x80>; + interrupts = <112>; + clocks = <&clk81>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + }; + diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml new file mode 100644 index 000000000000..5f34aed1ad40 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/spi/amlogic,meson6-spifc.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: Amlogic Meson SPI Flash Controller + +maintainers: + - Neil Armstrong <narmstrong@xxxxxxxxxxxx> + +allOf: + - $ref: "spi-controller.yaml#" + +description: | + The Meson SPIFC is a controller optimized for communication with SPI + NOR memories, without DMA support and a 64-byte unified transmit / + receive buffer. + +properties: + compatible: + oneOf: + - enum: + - amlogic,meson6-spifc + - enum: + - amlogic,meson-gxbb-spifc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + +examples: + - | + spi@c1108c80 { + compatible = "amlogic,meson6-spifc"; + reg = <0xc1108c80 0x80>; + clocks = <&clk81>; + #address-cells = <1>; + #size-cells = <0>; + }; + diff --git a/Documentation/devicetree/bindings/spi/spi-meson.txt b/Documentation/devicetree/bindings/spi/spi-meson.txt deleted file mode 100644 index b7f5e86fed22..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-meson.txt +++ /dev/null @@ -1,55 +0,0 @@ -Amlogic Meson SPI controllers - -* SPIFC (SPI Flash Controller) - -The Meson SPIFC is a controller optimized for communication with SPI -NOR memories, without DMA support and a 64-byte unified transmit / -receive buffer. - -Required properties: - - compatible: should be "amlogic,meson6-spifc" or "amlogic,meson-gxbb-spifc" - - reg: physical base address and length of the controller registers - - clocks: phandle of the input clock for the baud rate generator - - #address-cells: should be 1 - - #size-cells: should be 0 - - spi@c1108c80 { - compatible = "amlogic,meson6-spifc"; - reg = <0xc1108c80 0x80>; - clocks = <&clk81>; - #address-cells = <1>; - #size-cells = <0>; - }; - -* SPICC (SPI Communication Controller) - -The Meson SPICC is generic SPI controller for general purpose Full-Duplex -communications with dedicated 16 words RX/TX PIO FIFOs. - -Required properties: - - compatible: should be: - "amlogic,meson-gx-spicc" on Amlogic GX and compatible SoCs. - "amlogic,meson-axg-spicc" on Amlogic AXG and compatible SoCs - - reg: physical base address and length of the controller registers - - interrupts: The interrupt specifier - - clock-names: Must contain "core" - - clocks: phandle of the input clock for the baud rate generator - - #address-cells: should be 1 - - #size-cells: should be 0 - -Optional properties: - - resets: phandle of the internal reset line - -See ../spi/spi-bus.txt for more details on SPI bus master and slave devices -required and optional properties. - -Example : - spi@c1108d80 { - compatible = "amlogic,meson-gx-spicc"; - reg = <0xc1108d80 0x80>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core"; - clocks = <&clk81>; - #address-cells = <1>; - #size-cells = <0>; - }; -- 2.22.0
