01.08.2019 0:04, Sowjanya Komatineni пишет:
>
> On 7/31/19 4:11 AM, Dmitry Osipenko wrote:
>> 31.07.2019 3:20, Sowjanya Komatineni пишет:
>>> This patch adds support for saving OSC clock frequency and the
>>> drive-strength during OSC clock init and creates an API to restore
>>> OSC control register value from the saved context.
>>>
>>> This API is invoked by Tegra210 clock driver during system resume
>>> to restore the OSC clock settings.
>>>
>>> Acked-by: Thierry Reding <treding@xxxxxxxxxx>
>>> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
>>> ---
>>> drivers/clk/tegra/clk-tegra-fixed.c | 15 +++++++++++++++
>>> drivers/clk/tegra/clk.h | 1 +
>>> 2 files changed, 16 insertions(+)
>>>
>>> diff --git a/drivers/clk/tegra/clk-tegra-fixed.c
>>> b/drivers/clk/tegra/clk-tegra-fixed.c
>>> index 8d91b2b191cf..7c6c8abfcde6 100644
>>> --- a/drivers/clk/tegra/clk-tegra-fixed.c
>>> +++ b/drivers/clk/tegra/clk-tegra-fixed.c
>>> @@ -17,6 +17,10 @@
>>> #define OSC_CTRL 0x50
>>> #define OSC_CTRL_OSC_FREQ_SHIFT 28
>>> #define OSC_CTRL_PLL_REF_DIV_SHIFT 26
>>> +#define OSC_CTRL_MASK (0x3f2 | \
>>> + (0xf << OSC_CTRL_OSC_FREQ_SHIFT))
>>> +
>>> +static u32 osc_ctrl_ctx;
>>> int __init tegra_osc_clk_init(void __iomem *clk_base, struct
>>> tegra_clk *clks,
>>> unsigned long *input_freqs, unsigned int num,
>>> @@ -29,6 +33,7 @@ int __init tegra_osc_clk_init(void __iomem
>>> *clk_base, struct tegra_clk *clks,
>>> unsigned osc_idx;
>>> val = readl_relaxed(clk_base + OSC_CTRL);
>>> + osc_ctrl_ctx = val & OSC_CTRL_MASK;
>>> osc_idx = val >> OSC_CTRL_OSC_FREQ_SHIFT;
>>> if (osc_idx < num)
>>> @@ -96,3 +101,13 @@ void __init tegra_fixed_clk_init(struct tegra_clk
>>> *tegra_clks)
>>> *dt_clk = clk;
>>> }
>>> }
>>> +
>>> +void tegra_clk_osc_resume(void __iomem *clk_base)
>>> +{
>>> + u32 val;
>>> +
>>> + val = readl_relaxed(clk_base + OSC_CTRL) & ~OSC_CTRL_MASK;
>>> + val |= osc_ctrl_ctx;
>>> + writel_relaxed(val, clk_base + OSC_CTRL);
>> Why a full raw u32 OSC_CTRL value couldn't be simply saved and restored?
>
> Storing and restoring only required fields to avoid accidental
> misconfiguration.
>
> OSC_CTRL register has other bits (PLL_REF_DIV) which are configured by
> BR depending on OSC_FREQ and also setting PLL_REF_DIV while PLLS are in
> use is not safe.
I'm looking at the clk-driver sources and see that none of the Tegra
drivers ever change the OSC_CTRL configuration, T30/114 even have
#defines for the OSC_CTRL that are unused.
So, this leads to a question.. does any bootloader really ever change
the OSC_CTRL such that it differs after resume from suspend in
comparison to the value at the time of kernel's booting up?
