On 31/07/2019 14:14, Guillaume La Roque wrote: > Adding the devicetree binding documentation for the Amlogic temperature > sensor found in the Amlogic Meson G12 SoCs. > the G12A and G12B SoCs are supported. > > Signed-off-by: Guillaume La Roque <glaroque@xxxxxxxxxxxx> > --- > .../bindings/thermal/amlogic,thermal.yaml | 58 +++++++++++++++++++ > 1 file changed, 58 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml > > diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml > new file mode 100644 > index 000000000000..1e2fe84da13d > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml > @@ -0,0 +1,58 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/thermal/amlogic,thermal.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Amlogic Thermal Driver > + > +maintainers: > + - Guillaume La Roque <glaroque@xxxxxxxxxxxx> > + > +description: Amlogic Thermal driver > + > +properties: > + compatible: > + oneOf: > + - items: > + - enum: > + - amlogic,g12-cpu-thermal > + - amlogic,g12-ddr-thermal > + - enum: > + - amlogic,g12-thermal Shouldn't be : compatible: items: - enum: - amlogic,g12-cpu-thermal - amlogic,g12-ddr-thermal - const: - amlogic,g12-thermal instead ? > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + amlogic,ao-secure: > + description: phandle to the ao-secure syscon > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - amlogic,ao-secure > + > +examples: > + - | > + cpu_temp: temperature-sensor@ff634800 { > + compatible = "amlogic,g12-cpu-thermal", > + "amlogic,g12-thermal"; > + reg = <0x0 0xff634800 0x0 0x50>; > + interrupts = <0x0 0x24 0x0>; > + clocks = <&clk 164>; > + status = "okay"; > + #thermal-sensor-cells = <1>; > + amlogic,ao-secure = <&sec_AO>; > + }; > +... > \ No newline at end of file >