Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Tested-by: Wolfram Sang <wsa@xxxxxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/timer/renesas,mtu2.txt | 40 ++++++++++++++++++++++
drivers/clocksource/sh_mtu2.c | 8 +++++
2 files changed, 48 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/renesas,mtu2.txt
diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
new file mode 100644
index 0000000..c5dd032
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
@@ -0,0 +1,40 @@
+* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2)
+
+The MTU2 is a multi-purpose, multi-channel timer/counter with configurable
+clock inputs and programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. The MTU2 hardware supports five channels indexed from 0 to 4.
+
+Required Properties:
+
+ - compatible: must contain "renesas,mtu2"
+
+ - reg: base address and length of the registers block for the timer module.
+
+ - interrupt-parent, interrupts: interrupt specifiers for the timer, one for
+ each entry in interrupt-names.
+ - interrupt-names: must contain one entry named "tgi?a" for each enabled
+ channel, where "?" is the channel index expressed as one digit from "0" to
+ "4".
+
+ - clocks: a list of phandle + clock-specifier pairs, one for each entry
+ in clock-names.
+ - clock-names: must contain "fck" for the functional clock.
+
+
+Example: R7S72100 (RZ/A1H) MTU2 node
+
+ mtu2: timer@fcff0000 {
+ compatible = "renesas,mtu2";
+ reg = <0xfcff0000 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>,
+ <0 146 IRQ_TYPE_LEVEL_HIGH>,
+ <0 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0 154 IRQ_TYPE_LEVEL_HIGH>,
+ <0 159 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tgi0a", "tgi1a", "tgi2a", "tgi3a", "tgi4a";
+ clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+ clock-names = "fck";
+ };
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index ebdf9d1..79387af 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -23,6 +23,7 @@
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -502,11 +503,18 @@ static const struct platform_device_id sh_mtu2_id_table[] = {
};
MODULE_DEVICE_TABLE(platform, sh_mtu2_id_table);
+static const struct of_device_id sh_mtu2_of_table[] = {
+ { .compatible = "renesas,mtu2" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sh_mtu2_of_table);
+
static struct platform_driver sh_mtu2_device_driver = {
.probe = sh_mtu2_probe,
.remove = sh_mtu2_remove,
.driver = {
.name = "sh_mtu2",
+ .of_match_table = of_match_ptr(sh_mtu2_of_table),
},
.id_table = sh_mtu2_id_table,
};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
