Re: [PATCH v2 02/11] clk: at91: update main clk documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 24/03/2014 09:27, Boris BREZILLON :
> Update main clk documentation to match main clk implementation rework.
> 
> Signed-off-by: Boris BREZILLON <b.brezillon.dev@xxxxxxxxx>
> ---
>  .../devicetree/bindings/clock/at91-clock.txt       |   56 ++++++++++++++++----
>  1 file changed, 47 insertions(+), 9 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
> index cd5e239..9a7025b 100644
> --- a/Documentation/devicetree/bindings/clock/at91-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
> @@ -15,8 +15,13 @@ Required properties:
>  		All at91 specific clocks (clocks defined below) must be child
>  		node of the PMC node.
>  
> +	"atmel,at91rm9200-clk-main-osc"
> +	"atmel,at91sam9x5-clk-main-rc-osc"
> +		at91 main clk sources
> +
> +	"atmel,at91sam9x5-clk-main"
>  	"atmel,at91rm9200-clk-main":
> -		at91 main oscillator
> +		at91 main clock
>  
>  	"atmel,at91rm9200-clk-master" or
>  	"atmel,at91sam9x5-clk-master":
> @@ -85,24 +90,57 @@ For example:
>  		/* put at91 clocks here */
>  	};
>  
> +Required properties for main clock oscillator:
> +- interrupt-parent : must reference the PMC node.
> +- interrupts : shall be set to "<0>".
> +- clock-frequency : define the internal RC oscillator frequency.
> +
> +Optional properties:
> +- clock-accuracy : define the internal RC oscillator accuracy.
> +
> +For example:
> +	main_rc_osc: main_rc_osc {
> +		compatible = "atmel,at91sam9x5-clk-main-rc-osc";
> +		interrupt-parent = <&pmc>;
> +		interrupts = <0>;
> +		clock-frequency = <12000000>;
> +		clock-accuracy = <50000000>;
> +	};

Don't you swapped this example above with the description below?


> +Required properties for main clock internal RC oscillator:
> +- interrupt-parent : must reference the PMC node.
> +- interrupts : shall be set to "<0>".
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- clocks : shall encode the main osc source clk sources (see atmel datasheet).
> +
> +Optional properties:
> +- atmel,osc-bypass : boolean property. Specified if a clock signal is provided
> +  on XIN.
> +
> +  clock signal is directly provided on XIN pin.
> +
> +For example:
> +	main_osc: main_osc {
> +		compatible = "atmel,at91rm9200-clk-main-osc";
> +		interrupt-parent = <&pmc>;
> +		interrupts = <0>;
> +		#clock-cells = <0>;
> +		clocks = <&main_xtal>;
> +	};
> +
>  Required properties for main clock:
>  - interrupt-parent : must reference the PMC node.
>  - interrupts : shall be set to "<0>".
>  - #clock-cells : from common clock binding; shall be set to 0.
> -- clocks (optional if clock-frequency is provided) : shall be the slow clock
> -	phandle. This clock is used to calculate the main clock rate if
> -	"clock-frequency" is not provided.
> -- clock-frequency : the main oscillator frequency.Prefer the use of
> -	"clock-frequency" over automatic clock rate calculation.
> +- clocks : shall encode the main clk sources (see atmel datasheet).
>  
>  For example:
>  	main: mainck {
> -		compatible = "atmel,at91rm9200-clk-main";
> +		compatible = "atmel,at91sam9x5-clk-main";
>  		interrupt-parent = <&pmc>;
>  		interrupts = <0>;
>  		#clock-cells = <0>;
> -		clocks = <&ck32k>;
> -		clock-frequency = <18432000>;
> +		clocks = <&main_rc_osc &main_osc>;
>  	};
>  
>  Required properties for master clock:
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux