On Tue, Jul 30, 2019 at 11:57 AM Philippe Schenker <dev@xxxxxxxxxxxx> wrote: > &backlight { > @@ -204,6 +228,77 @@ > */ > &i2c3 { > status = "okay"; > + > + adv7280: adv7280@21 { > + compatible = "adv7280"; > + reg = <0x21>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ipu1_csi0 &pinctrl_cam_mclk>; > + clocks = <&clks 200>; Please replace this 200 with a proper clock label. > + clock-names = "csi_mclk"; > + DOVDD-supply = <®_3p3v>; > + AVDD-supply = <®_3p3v>; > + DVDD-supply = <®_3p3v>; > + PVDD-supply = <®_3p3v>; > + csi_id = <0>; This is not a valid property upstream. It seems you just ported it from a downstream vendor kernel. Please make sure you test with the dt-bindings from mainline. > + mclk = <24000000>; > + mclk_source = <1>; > + status = "okay"; > + }; > + > + /* Video ADC on Analog Camera Module */ > + adv7180: adv7180@21 { > + compatible = "adv,adv7180"; > + reg = <0x21>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ipu1_csi0 &pinctrl_cam_mclk>; > + clocks = <&clks 200>; clock label, please. > + clock-names = "csi_mclk"; > + DOVDD-supply = <®_3p3v>; /* 3.3v */ > + AVDD-supply = <®_3p3v>; /* 1.8v */ > + DVDD-supply = <®_3p3v>; /* 1.8v */ > + PVDD-supply = <®_3p3v>; /* 1.8v */ > + csi_id = <0>; Same here > + mclk = <24000000>; > + mclk_source = <1>; > + cvbs = <1>; > + status = "disabled"; > + }; > + > + max9526: max9526@20 { > + compatible = "maxim,max9526"; This is not documented in mainline.