From: Oleksandr Suvorov <oleksandr.suvorov@xxxxxxxxxxx>
- add recovery mode for applicable i2c buses for
Colibri iMX7 module.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@xxxxxxxxxxx>
Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
---
arch/arm/boot/dts/imx7-colibri.dtsi | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index a8d992f3e897..2480623c92ff 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -140,8 +140,12 @@
&i2c1 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
+ pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>;
+ scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+
status = "okay";
codec: sgtl5000@a {
@@ -242,8 +246,11 @@
&i2c4 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_recovery>;
+ scl-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
};
&lcdif {
@@ -540,6 +547,13 @@
>;
};
+ pinctrl_i2c4_recovery: i2c4-recoverygrp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8 0x4000007f
+ MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 0x4000007f
+ >;
+ };
+
pinctrl_lcdif_dat: lcdif-dat-grp {
fsl,pins = <
MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
@@ -740,6 +754,13 @@
>;
};
+ pinctrl_i2c1_recovery: i2c1-recoverygrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x4000007f
+ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x4000007f
+ >;
+ };
+
pinctrl_cd_usdhc1: usdhc1-cd-grp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */
--
2.22.0
