Re: [PATCH 0/3] Add IMX290 CMOS image sensor support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jul 04, 2019 at 12:32:27AM +0530, Manivannan Sadhasivam wrote:
> Hello,
> 
> This patchset adds support for IMX290 CMOS image sensor from Sony.
> Sensor can be programmed through I2C and 4-wire interface but the
> current driver only supports I2C interface. Also, the sensor is
> capable of outputting frames in following 3 interfaces:
> 
> * CMOS logic parallel SDR output
> * Low voltage LVDS serial DDR output
> * CSI-2 serial data output
> 
> But the current driver only supports CSI-2 output available from 4 lanes.
> In the case of sensor resolution, driver only supports 1920x1080 and
> 1280x720 at mid data rate of 445.5 Mpbs.
> 
> The driver has been validated using Framos IMX290 module interfaced to
> 96Boards Dragonboard410c.
> 

Ping on the patchset!

Thanks,
Mani

> Thanks,
> Mani
> 
> Manivannan Sadhasivam (3):
>   dt-bindings: media: i2c: Add IMX290 CMOS sensor binding
>   media: i2c: Add IMX290 CMOS image sensor driver
>   MAINTAINERS: Add entry for IMX290 CMOS image sensor driver
> 
>  .../devicetree/bindings/media/i2c/imx290.txt  |  51 ++
>  MAINTAINERS                                   |   8 +
>  drivers/media/i2c/Kconfig                     |  11 +
>  drivers/media/i2c/Makefile                    |   1 +
>  drivers/media/i2c/imx290.c                    | 845 ++++++++++++++++++
>  5 files changed, 916 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx290.txt
>  create mode 100644 drivers/media/i2c/imx290.c
> 
> -- 
> 2.17.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux