On Tue, 30 Jul 2019, at 09:07, Rob Herring wrote: > On Sun, Jul 28, 2019 at 10:39 PM Andrew Jeffery <andrew@xxxxxxxx> wrote: > > > > The AST2600 splits out the MDIO bus controller from the MAC into its own > > IP block and rearranges the register layout. Add a new binding to > > describe the new hardware. > > > > Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx> > > --- > > .../bindings/net/aspeed,ast2600-mdio.yaml | 61 +++++++++++++++++++ > > 1 file changed, 61 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml > > > > diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml > > new file mode 100644 > > index 000000000000..fa86f6438473 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml > > @@ -0,0 +1,61 @@ > > +# SPDX-License-Identifier: GPL-2.0-or-later > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/net/aspeed,ast2600-mdio.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: ASPEED AST2600 MDIO Controller > > + > > +maintainers: > > + - Andrew Jeffery <andrew@xxxxxxxx> > > + > > +description: |+ > > + The ASPEED AST2600 MDIO controller is the third iteration of ASPEED's MDIO > > + bus register interface, this time also separating out the controller from the > > + MAC. > > + > > Should have a: > > allOf: > - $ref: "mdio.yaml#" Ack. > > > +properties: > > + compatible: > > + const: aspeed,ast2600-mdio > > + reg: > > + maxItems: 1 > > + description: The register range of the MDIO controller instance > > > + "#address-cells": > > + const: 1 > > + "#size-cells": > > + const: 0 > > Then you can drop these 2. Great. > > > + > > +patternProperties: > > + "^ethernet-phy@[a-f0-9]$": > > + properties: > > + reg: > > + description: > > + The MDIO bus index of the PHY > > And this. > > > + compatible: > > + enum: > > + - ethernet-phy-ieee802.3-c22 > > + - ethernet-phy-ieee802.3-c45 > > This isn't specific to ASpeed either and is already covered by > ethernet-phy.yaml. > > So that means none of the child node schema is needed here. Bah, I'd developed the patches on v5.2 while waiting for v5.3-rc1 to come out. > > > + required: > > + - reg > > + > > +required: > > + - compatible > > + - reg > > + - "#address-cells" > > + - "#size-cells" > > + > > +examples: > > + - | > > + mdio0: mdio@1e650000 { > > + compatible = "aspeed,ast2600-mdio"; > > + reg = <0x1e650000 0x8>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + status = "okay"; > > Don't show status in examples. Sorry, copy/paste at fault. Thanks for the feedback. Andrew > > > + > > + ethphy0: ethernet-phy@0 { > > + compatible = "ethernet-phy-ieee802.3-c22"; > > + reg = <0>; > > + }; > > + }; > > -- > > 2.20.1 > > >
