This patch decide proper lowpower mode of either a15 or a9 according to own ID
from Main ID register.
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Marc Zynigier <marc.zyngier@xxxxxxx>
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
arch/arm/mach-exynos/hotplug.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index 5eead53..acf3119 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -135,16 +135,21 @@ void __ref exynos_cpu_die(unsigned int cpu)
int primary_part = 0;
/*
- * we're ready for shutdown now, so do it.
- * Exynos4 is A9 based while Exynos5 is A15; check the CPU part
- * number by reading the Main ID register and then perform the
- * appropriate sequence for entering low power.
+ * Prepare the CPU for shutting down. The required sequence of
+ * operations depends on core type. CPUID part number can be used to
+ * determine the right way.
*/
- asm("mrc p15, 0, %0, c0, c0, 0" : "=r"(primary_part) : : "cc");
- if ((primary_part & 0xfff0) == 0xc0f0)
+ primary_part = read_cpuid_part_number();
+
+ switch (primary_part) {
+ case ARM_CPU_PART_CORTEX_A7:
+ case ARM_CPU_PART_CORTEX_A15:
cpu_enter_lowpower_a15();
- else
+ break;
+ default:
cpu_enter_lowpower_a9();
+ break;
+ }
platform_do_lowpower(cpu, &spurious);
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
