Use a space before and after assignment operator to have consistent
style.
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm/boot/dts/rk3036.dtsi | 2 +-
arch/arm/boot/dts/rk3288-evb.dtsi | 2 +-
arch/arm/boot/dts/rk3288-tinker.dtsi | 12 ++++++------
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 2 +-
4 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 0290ea4edd32..c776321b2cc4 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -484,7 +484,7 @@
compatible = "rockchip,rockchip-spi";
reg = <0x20074000 0x1000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>;
+ clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>;
clock-names = "apb-pclk","spi_pclk";
dmas = <&pdma 8>, <&pdma 9>;
dma-names = "tx", "rx";
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 820440715302..2afd686b2033 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -97,7 +97,7 @@
};
panel: panel {
- compatible ="lg,lp079qx1-sp0v", "simple-panel";
+ compatible = "lg,lp079qx1-sp0v", "simple-panel";
backlight = <&backlight>;
enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&lcd_cs>;
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 293576869546..81e4e953d4a4 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -47,13 +47,13 @@
compatible = "gpio-leds";
act-led {
- gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger="mmc0";
+ gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
};
heartbeat-led {
- gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger="heartbeat";
+ gpios = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
};
pwr-led {
@@ -443,7 +443,7 @@
&saradc {
vref-supply = <&vcc18_ldo1>;
- status ="okay";
+ status = "okay";
};
&sdmmc {
@@ -516,7 +516,7 @@
};
&usb_otg {
- status= "okay";
+ status = "okay";
};
&vopb {
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index 1cadb522fd0d..e0183655e92c 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -86,7 +86,7 @@
};
panel: panel {
- compatible ="innolux,n116bge", "simple-panel";
+ compatible = "innolux,n116bge", "simple-panel";
status = "okay";
power-supply = <&vcc33_lcd>;
backlight = <&backlight>;
--
2.17.1
