On Thu, Apr 17, 2014 at 07:57:53AM +0100, Lee Jones wrote:
> > > s/regmap/Regmap
> >
> > It's consistently written regmap in all the documentation and so on :)
>
> Furry muff; but the comments still stand for the acronyms.
>
> > > addmap{0,1} doesn't quite sit right with me.
> >
> > > REVISIT: Ah, it's address-map, rather than add map. Okay, not as bad
> > > as I first thought, but still, is there a better naming convention you
> > > could use?
> >
> > addrmap or something?
>
> Right, that was what I was thinking. However, I prefer something along
> the lines of 'i2c' and 'i2c_sec' or 'client' and 'client_slv' etc.
FWIW, the reason it's addmap{0,1} is that the datasheet has documents
ADDMAP=0 and the first bank of registers and ADDMAP=1 as the second bank
of registers. I adopted that to match the docs for the part.
I guess we could do i2c and i2c_sec, I'll just have to put a comment
correlating it to the h/w. Calling it 'slv' implies something else
so we should avoid that here. The notion of a "secondary" i2c device
is completely a Linux I2C subsystem fabrication which wouldn't exist
if it allowed multiple slave addresses per device. From a h/w
perspective there is really no primary and secondary relationship.
I'm fine with i2c/i2c_sec or addrmap0/1 and I will just comment to
correlate with the datasheet..pick one.
-Matt
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
