[PATCH v3 6a/7] dt-bindings: Add ANX6345 DP/eDP transmitter binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The anx6345 is an ultra-low power DisplayPort/eDP transmitter designed
for portable devices.

Add a binding document for it.

Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Torsten Duwe <duwe@xxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/display/bridge/anx6345.yaml |   90 ++++++++++
 1 file changed, 90 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
new file mode 100644
index 000000000000..0af092d101c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/anx6345.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX6345 eDP Transmitter Device Tree Bindings
+
+maintainers:
+  - Torsten Duwe <duwe@xxxxxx>
+
+description: |
+  The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for
+  portable devices.
+
+properties:
+  compatible:
+    const: analogix,anx6345
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device
+
+  reset-gpios:
+    maxItems: 1
+    description: active low GPIO to use for reset
+
+  dvdd12-supply:
+    maxItems: 1
+    description: Regulator for 1.2V digital core power.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  dvdd25-supply:
+    maxItems: 1
+    description: Regulator for 2.5V digital core power.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ports:
+    type: object
+    minItems: 1
+    maxItems: 2
+    description: |
+      Video port 0 for LVTTL input,
+      Video port 1 for eDP output (panel or connector)
+      using the DT bindings defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - dvdd12-supply
+  - dvdd25-supply
+  - ports
+
+examples:
+ - |
+  anx6345: anx6345@38 {
+      compatible = "analogix,anx6345";
+      reg = <0x38>;
+      reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+      dvdd25-supply = <&reg_dldo2>;
+      dvdd12-supply = <&reg_fldo1>;
+
+      ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          anx6345_in: port@0 {
+              #address-cells = <1>;
+              #size-cells = <0>;
+              reg = <0>;
+              anx6345_in_tcon0: endpoint@0 {
+                  reg = <0>;
+                  remote-endpoint = <&tcon0_out_anx6345>;
+              };
+          };
+
+          anx6345_out: port@1 {
+              #address-cells = <1>;
+              #size-cells = <0>;
+              reg = <1>;
+
+              anx6345_out_panel: endpoint@0 {
+                  reg = <0>;
+                  remote-endpoint = <&panel_in_edp>;
+              };
+          };
+      };
+  };



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux