What's needed is basically a pointer to the mdio registers. This is one way to store it inside bus->priv allocated space, without upsetting sparse. Reworked accessor design as requested by Andrew Lunn in the process. Used devm_* variant to further clean up the init error / remove paths. Fixes following sparse warning: warning: incorrect type in assignment (different address spaces) expected void *priv got struct enetc_mdio_regs [noderef] <asn:2>*[assigned] regs Fixes: ebfcb23d62ab ("enetc: Add ENETC PF level external MDIO support") CC: Andrew Lunn <andrew@xxxxxxx> Signed-off-by: Claudiu Manoil <claudiu.manoil@xxxxxxx> --- v1 - added this patch v2 - reworked accessors as per Andrew Lunn's request .../net/ethernet/freescale/enetc/enetc_mdio.c | 94 +++++++++---------- 1 file changed, 46 insertions(+), 48 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c index 77b9cd10ba2b..05094601ece8 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c @@ -8,16 +8,22 @@ #include "enetc_pf.h" -struct enetc_mdio_regs { - u32 mdio_cfg; /* MDIO configuration and status */ - u32 mdio_ctl; /* MDIO control */ - u32 mdio_data; /* MDIO data */ - u32 mdio_addr; /* MDIO address */ +#define ENETC_MDIO_REG_OFFSET 0x1c00 +#define ENETC_MDIO_CFG 0x0 /* MDIO configuration and status */ +#define ENETC_MDIO_CTL 0x4 /* MDIO control */ +#define ENETC_MDIO_DATA 0x8 /* MDIO data */ +#define ENETC_MDIO_ADDR 0xc /* MDIO address */ + +#define enetc_mdio_rd(hw, off) \ + enetc_port_rd(hw, ENETC_##off + ENETC_MDIO_REG_OFFSET) +#define enetc_mdio_wr(hw, off, val) \ + enetc_port_wr(hw, ENETC_##off + ENETC_MDIO_REG_OFFSET, val) +#define enetc_mdio_rd_reg(off) enetc_mdio_rd(hw, off) + +struct enetc_mdio_priv { + struct enetc_hw *hw; }; -#define bus_to_enetc_regs(bus) (struct enetc_mdio_regs __iomem *)((bus)->priv) - -#define ENETC_MDIO_REG_OFFSET 0x1c00 #define ENETC_MDC_DIV 258 #define MDIO_CFG_CLKDIV(x) ((((x) >> 1) & 0xff) << 8) @@ -33,18 +39,19 @@ struct enetc_mdio_regs { #define MDIO_DATA(x) ((x) & 0xffff) #define TIMEOUT 1000 -static int enetc_mdio_wait_complete(struct enetc_mdio_regs __iomem *regs) +static int enetc_mdio_wait_complete(struct enetc_hw *hw) { u32 val; - return readx_poll_timeout(enetc_rd_reg, ®s->mdio_cfg, val, + return readx_poll_timeout(enetc_mdio_rd_reg, MDIO_CFG, val, !(val & MDIO_CFG_BSY), 10, 10 * TIMEOUT); } static int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 value) { - struct enetc_mdio_regs __iomem *regs = bus_to_enetc_regs(bus); + struct enetc_mdio_priv *mdio_priv = bus->priv; + struct enetc_hw *hw = mdio_priv->hw; u32 mdio_ctl, mdio_cfg; u16 dev_addr; int ret; @@ -59,29 +66,29 @@ static int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum, mdio_cfg &= ~MDIO_CFG_ENC45; } - enetc_wr_reg(®s->mdio_cfg, mdio_cfg); + enetc_mdio_wr(hw, MDIO_CFG, mdio_cfg); - ret = enetc_mdio_wait_complete(regs); + ret = enetc_mdio_wait_complete(hw); if (ret) return ret; /* set port and dev addr */ mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr); - enetc_wr_reg(®s->mdio_ctl, mdio_ctl); + enetc_mdio_wr(hw, MDIO_CTL, mdio_ctl); /* set the register address */ if (regnum & MII_ADDR_C45) { - enetc_wr_reg(®s->mdio_addr, regnum & 0xffff); + enetc_mdio_wr(hw, MDIO_ADDR, regnum & 0xffff); - ret = enetc_mdio_wait_complete(regs); + ret = enetc_mdio_wait_complete(hw); if (ret) return ret; } /* write the value */ - enetc_wr_reg(®s->mdio_data, MDIO_DATA(value)); + enetc_mdio_wr(hw, MDIO_DATA, MDIO_DATA(value)); - ret = enetc_mdio_wait_complete(regs); + ret = enetc_mdio_wait_complete(hw); if (ret) return ret; @@ -90,7 +97,8 @@ static int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum, static int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum) { - struct enetc_mdio_regs __iomem *regs = bus_to_enetc_regs(bus); + struct enetc_mdio_priv *mdio_priv = bus->priv; + struct enetc_hw *hw = mdio_priv->hw; u32 mdio_ctl, mdio_cfg; u16 dev_addr, value; int ret; @@ -104,41 +112,41 @@ static int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum) mdio_cfg &= ~MDIO_CFG_ENC45; } - enetc_wr_reg(®s->mdio_cfg, mdio_cfg); + enetc_mdio_wr(hw, MDIO_CFG, mdio_cfg); - ret = enetc_mdio_wait_complete(regs); + ret = enetc_mdio_wait_complete(hw); if (ret) return ret; /* set port and device addr */ mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr); - enetc_wr_reg(®s->mdio_ctl, mdio_ctl); + enetc_mdio_wr(hw, MDIO_CTL, mdio_ctl); /* set the register address */ if (regnum & MII_ADDR_C45) { - enetc_wr_reg(®s->mdio_addr, regnum & 0xffff); + enetc_mdio_wr(hw, MDIO_ADDR, regnum & 0xffff); - ret = enetc_mdio_wait_complete(regs); + ret = enetc_mdio_wait_complete(hw); if (ret) return ret; } /* initiate the read */ - enetc_wr_reg(®s->mdio_ctl, mdio_ctl | MDIO_CTL_READ); + enetc_mdio_wr(hw, MDIO_CTL, mdio_ctl | MDIO_CTL_READ); - ret = enetc_mdio_wait_complete(regs); + ret = enetc_mdio_wait_complete(hw); if (ret) return ret; /* return all Fs if nothing was there */ - if (enetc_rd_reg(®s->mdio_cfg) & MDIO_CFG_RD_ER) { + if (enetc_mdio_rd(hw, MDIO_CFG) & MDIO_CFG_RD_ER) { dev_dbg(&bus->dev, "Error while reading PHY%d reg at %d.%hhu\n", phy_id, dev_addr, regnum); return 0xffff; } - value = enetc_rd_reg(®s->mdio_data) & 0xffff; + value = enetc_mdio_rd(hw, MDIO_DATA) & 0xffff; return value; } @@ -146,12 +154,12 @@ static int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum) int enetc_mdio_probe(struct enetc_pf *pf) { struct device *dev = &pf->si->pdev->dev; - struct enetc_mdio_regs __iomem *regs; + struct enetc_mdio_priv *mdio_priv; struct device_node *np; struct mii_bus *bus; - int ret; + int err; - bus = mdiobus_alloc_size(sizeof(regs)); + bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv)); if (!bus) return -ENOMEM; @@ -159,41 +167,31 @@ int enetc_mdio_probe(struct enetc_pf *pf) bus->read = enetc_mdio_read; bus->write = enetc_mdio_write; bus->parent = dev; + mdio_priv = bus->priv; + mdio_priv->hw = &pf->si->hw; snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev)); - /* store the enetc mdio base address for this bus */ - regs = pf->si->hw.port + ENETC_MDIO_REG_OFFSET; - bus->priv = regs; - np = of_get_child_by_name(dev->of_node, "mdio"); if (!np) { dev_err(dev, "MDIO node missing\n"); - ret = -EINVAL; - goto err_registration; + return -EINVAL; } - ret = of_mdiobus_register(bus, np); - if (ret) { + err = of_mdiobus_register(bus, np); + if (err) { of_node_put(np); dev_err(dev, "cannot register MDIO bus\n"); - goto err_registration; + return err; } of_node_put(np); pf->mdio = bus; return 0; - -err_registration: - mdiobus_free(bus); - - return ret; } void enetc_mdio_remove(struct enetc_pf *pf) { - if (pf->mdio) { + if (pf->mdio) mdiobus_unregister(pf->mdio); - mdiobus_free(pf->mdio); - } } -- 2.17.1