The SPI bus has a single address cell and not size cells.
Also, dtc thinks the SPI nodes are preferrably called "spi" and it is
right to think so.
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
arch/arm/boot/dts/mmp2.dtsi | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 50b6c38b39cc3..e64639ce57a91 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -346,35 +346,43 @@
status = "disabled";
};
- ssp1: ssp@d4035000 {
+ ssp1: spi@d4035000 {
compatible = "marvell,mmp2-ssp";
reg = <0xd4035000 0x1000>;
clocks = <&soc_clocks MMP2_CLK_SSP0>;
interrupts = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- ssp2: ssp@d4036000 {
+ ssp2: spi@d4036000 {
compatible = "marvell,mmp2-ssp";
reg = <0xd4036000 0x1000>;
clocks = <&soc_clocks MMP2_CLK_SSP1>;
interrupts = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- ssp3: ssp@d4037000 {
+ ssp3: spi@d4037000 {
compatible = "marvell,mmp2-ssp";
reg = <0xd4037000 0x1000>;
clocks = <&soc_clocks MMP2_CLK_SSP2>;
interrupts = <20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- ssp4: ssp@d4039000 {
+ ssp4: spi@d4039000 {
compatible = "marvell,mmp2-ssp";
reg = <0xd4039000 0x1000>;
clocks = <&soc_clocks MMP2_CLK_SSP3>;
interrupts = <21>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
--
2.21.0
