Hi Linus.
On Wed, Jul 24, 2019 at 03:49:58PM +0200, Linus Walleij wrote:
> The pads were an earlier workaround for the internal image
> pipeline in the Linux fbdev subsystem. As we move to generic
> definition of display properties and drivers that no longer
> need this to work, deprecate this property.
>
> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
> Cc: Pawel Moll <pawel.moll@xxxxxxx>
> Cc: Liviu Dudau <Liviu.Dudau@xxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/display/arm,pl11x.txt | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt
> index 572fa2773ec4..3f977e72a200 100644
> --- a/Documentation/devicetree/bindings/display/arm,pl11x.txt
> +++ b/Documentation/devicetree/bindings/display/arm,pl11x.txt
> @@ -39,9 +39,11 @@ Required sub-nodes:
>
> - port: describes LCD panel signals, following the common binding
> for video transmitter interfaces; see
> - Documentation/devicetree/bindings/media/video-interfaces.txt;
> - when it is a TFT panel, the port's endpoint must define the
> - following property:
> + Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Deprecated properties:
> + The port's endbpoint subnode had this, now deprecated property
> + in the past. Drivers should be able to survive without it:
>
> - arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values,
> defining the way CLD pads are wired up; first value
> @@ -80,7 +82,6 @@ Example:
> port {
> clcd_pads: endpoint {
> remote-endpoint = <&clcd_panel>;
> - arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
> };
> };
>
> --
> 2.21.0
