On Wed, Jul 24, 2019 at 10:20 AM Vinod Koul <vkoul@xxxxxxxxxx> wrote:
>
> Unit address is supposed to be a number, using a macro with hex value is
> not recommended, so add the value in unit name.
>
> arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:966.16-969.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4d: unit name should not have leading "0x"
> arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:971.16-974.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4e: unit name should not have leading "0x"
> arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:976.16-979.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4f: unit name should not have leading "0x"
> arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:981.16-984.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x50: unit name should not have leading "0x"
> arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:986.16-989.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x51: unit name should not have leading "0x"
>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Reviewed-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> index 1ebbd568dfd7..9b27b8346ba1 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> @@ -963,27 +963,27 @@ ap_ts_i2c: &i2c14 {
> };
>
> &pm8998_adc {
> - adc-chan@ADC5_AMUX_THM1_100K_PU {
> + adc-chan@4d {
> reg = <ADC5_AMUX_THM1_100K_PU>;
> label = "sdm_temp";
> };
>
> - adc-chan@ADC5_AMUX_THM2_100K_PU {
> + adc-chan@4e {
> reg = <ADC5_AMUX_THM2_100K_PU>;
> label = "quiet_temp";
> };
>
> - adc-chan@ADC5_AMUX_THM3_100K_PU {
> + adc-chan@4f {
> reg = <ADC5_AMUX_THM3_100K_PU>;
> label = "lte_temp_1";
> };
>
> - adc-chan@ADC5_AMUX_THM4_100K_PU {
> + adc-chan@50 {
> reg = <ADC5_AMUX_THM4_100K_PU>;
> label = "lte_temp_2";
> };
>
> - adc-chan@ADC5_AMUX_THM5_100K_PU {
> + adc-chan@51 {
> reg = <ADC5_AMUX_THM5_100K_PU>;
> label = "charger_temp";
> };
> --
> 2.20.1
>
