This adds documentation of device tree bindings for the
DesignWare IP reset controller.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
Signed-off-by: Luis Oliveira <luis.oliveira@xxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
Changelog
-no changes
.../devicetree/bindings/reset/snps,dw-reset.txt | 30 ++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/snps,dw-reset.txt
diff --git a/Documentation/devicetree/bindings/reset/snps,dw-reset.txt b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
new file mode 100644
index 0000000..f94f911
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
@@ -0,0 +1,30 @@
+Synopsys DesignWare Reset controller
+=======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+
+- compatible: should be one of the following.
+ "snps,dw-high-reset" - for active high configuration
+ "snps,dw-low-reset" - for active low configuration
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #reset-cells: must be 1.
+
+example:
+
+ dw_rst_1: reset-controller@0000 {
+ compatible = "snps,dw-high-reset";
+ reg = <0x0000 0x4>;
+ #reset-cells = <1>;
+ };
+
+ dw_rst_2: reset-controller@1000 {i
+ compatible = "snps,dw-low-reset";
+ reg = <0x1000 0x8>;
+ #reset-cells = <1>;
+ };
--
2.7.4
