This updates the documentation for supporting a optional extra interrupt
cell to specify edge vs level triggered.
Signed-off-by: Mischa Jonker <mischa.jonker@xxxxxxxxxxxx>
---
.../interrupt-controller/snps,archs-idu-intc.txt | 30 ++++++++++++++--------
1 file changed, 20 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
index 09fc02b..a5c1db9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
@@ -1,20 +1,30 @@
* ARC-HS Interrupt Distribution Unit
- This optional 2nd level interrupt controller can be used in SMP configurations for
- dynamic IRQ routing, load balancing of common/external IRQs towards core intc.
+ This optional 2nd level interrupt controller can be used in SMP configurations
+ for dynamic IRQ routing, load balancing of common/external IRQs towards core
+ intc.
Properties:
- compatible: "snps,archs-idu-intc"
- interrupt-controller: This is an interrupt controller.
-- #interrupt-cells: Must be <1>.
-
- Value of the cell specifies the "common" IRQ from peripheral to IDU. Number N
- of the particular interrupt line of IDU corresponds to the line N+24 of the
- core interrupt controller.
-
- intc accessed via the special ARC AUX register interface, hence "reg" property
- is not specified.
+- #interrupt-cells: Must be <1> or <2>.
+
+ Value of the first cell specifies the "common" IRQ from peripheral to IDU.
+ Number N of the particular interrupt line of IDU corresponds to the line N+24
+ of the core interrupt controller.
+
+ The (optional) second cell specifies any of the following flags:
+ - bits[3:0] trigger type and level flags
+ 1 = low-to-high edge triggered
+ 2 = NOT SUPPORTED (high-to-low edge triggered)
+ 4 = active high level-sensitive <<< DEFAULT
+ 8 = NOT SUPPORTED (active low level-sensitive)
+ When no second cell is specified, the interrupt is assumed to be level
+ sensitive.
+
+ The interrupt controller is accessed via the special ARC AUX register
+ interface, hence "reg" property is not specified.
Example:
core_intc: core-interrupt-controller {
--
2.8.3
