On Mon, Jul 22, 2019 at 01:27:28PM +0300, andradanciu1997 wrote: > Add support for TechNexion PICO-PI-IMX8M based on patches from Richard Hu > Datasheet is at: https://s3.us-east-2.amazonaws.com/technexion/datasheets/picopiimx8m.pdf > > Changes since v5: > - removed comment /* PMIC BD71837 PMIC_nINT GPIO1_IO12 */ > - added "Reviewed-by" tags > > Changes since v4: > - removed #address-cells and #size-cells from regulators node > > Changes since v3: > - renamed pico-pi-8m.dts to imx8mq-pico-pi.dts > - moved iomuxc node as the last one > - removed pinctrl-assert-gpios property from fec1 node > - removed at803x,led-act-blind-workaround, at803x,eee-disabled > properties from mdio node > - added pinctrl-names = "default" to i2c1 node > - changed bd71837 pmic support properties according to > Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt > - removed A53_0 node > > Changes since v2: > - changed PICO-PI-8M bord compatible from wand,imx8mq-pico-pi to > technexion,pico-pi-imx8m > - removed bootargs property > - removed regulators node and put fixed regulator directly under root node > - changed node name from usb_otg_vbus to regulator-usb-otg-vbus > - removed pinctrl-names property from iomuxc node > - removed wand-pi-8m container node > - sorted pinctrl nodes alphabetically > - removed tusb320_irqgrp, tusb320_irqgrp nodes because there is no upstream > driver > - changed properties' order in usb_dwc3_1 node > > Changes since v1: > - renamed wandboard-pi-8m.dts to pico-pi-8m.dts > - removed pinctrl_csi1, pinctrl_wifi_ctrl > - used generic name for pmic > - removed gpo node > - delete regulator-virtuals node > - remove always-on property from buck1-8 and ldo3-7 > - remove pmic-buck-uses-i2c-dvs property for buck1-4 > > Andra Danciu (1): > dt-bindings: arm: fsl: Add the pico-pi-imx8m board > > Richard Hu (1): > arm64: dts: fsl: pico-pi: Add a device tree for the PICO-PI-IMX8M Applied both, thanks.
