This patch adds DT bindings for s6e3fa0 panel.
The bindings describes panel resources, display timings, delays
and physical size.
Changelog v2:
- Adds unit address (commented by Sachin Kamat)
Changelog v3:
- Removes optional delay, size properties (commented by Laurent Pinchart)
- Adds OLED detection, TE gpio properties
Signed-off-by: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
.../devicetree/bindings/panel/samsung,s6e3fa0.txt | 46 ++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt
diff --git a/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt b/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt
new file mode 100644
index 0000000..8aabeca
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt
@@ -0,0 +1,46 @@
+Samsung S6E3FA0 AMOLED LCD 5.7 inch panel
+
+Required properties:
+ - compatible: "samsung,s6e3fa0"
+ - reg: the virtual channel number of a DSI peripheral
+ - vdd3-supply: core voltage supply
+ - vci-supply: voltage supply for analog circuits
+ - reset-gpio: a GPIO spec for the reset pin
+ - det-gpio: a GPIO spec for the OLED detection pin
+ - te-gpio: a GPIO spec for the TE pin
+ - display-timings: timings for the connected panel as described by [1]
+
+Optional properties:
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [2]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ panel@0 {
+ compatible = "samsung,s6e3fa0";
+ reg = <0>;
+ vdd3-supply = <&vcclcd_reg>;
+ vci-supply = <&vlcd_reg>;
+ reset-gpio = <&gpy7 4 0>;
+ det-gpio = <&gpg0 6 0>;
+ te-gpio = <&gpd1 7 0>;
+
+ display-timings {
+ timing0: timing-0 {
+ clock-frequency = <0>;
+ hactive = <1080>;
+ vactive = <1920>;
+ hfront-porch = <2>;
+ hback-porch = <2>;
+ hsync-len = <1>;
+ vfront-porch = <1>;
+ vback-porch = <4>;
+ vsync-len = <1>;
+ };
+ };
+ };
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
