On Fri, Jul 05, 2019 at 08:44:35PM +0530, Manivannan Sadhasivam wrote: > Hello, > > This patchset adds common clock driver for Bitmain BM1880 SoC clock > controller. The clock controller consists of gate, divider, mux > and pll clocks with different compositions. Hence, the driver uses > composite clock structure in place where multiple clocking units are > combined together. > > This patchset also removes UART fixed clock and sources clocks from clock > controller for Sophon Edge board where the driver has been validated. > Ping on this series. Thanks, Mani > Thanks, > Mani > > Manivannan Sadhasivam (5): > dt-bindings: clock: Add Bitmain BM1880 SoC clock controller binding > arm64: dts: bitmain: Add clock controller support for BM1880 SoC > arm64: dts: bitmain: Source common clock for UART controllers > clk: Add driver for Bitmain BM1880 SoC clock controller > MAINTAINERS: Add entry for Bitmain BM1880 SoC clock driver > > .../bindings/clock/bitmain,bm1880-clk.txt | 47 + > MAINTAINERS | 2 + > .../boot/dts/bitmain/bm1880-sophon-edge.dts | 9 - > arch/arm64/boot/dts/bitmain/bm1880.dtsi | 27 + > drivers/clk/Kconfig | 6 + > drivers/clk/Makefile | 1 + > drivers/clk/clk-bm1880.c | 947 ++++++++++++++++++ > include/dt-bindings/clock/bm1880-clock.h | 82 ++ > 8 files changed, 1112 insertions(+), 9 deletions(-) > create mode 100644 Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt > create mode 100644 drivers/clk/clk-bm1880.c > create mode 100644 include/dt-bindings/clock/bm1880-clock.h > > -- > 2.17.1 >
