This add Freescale Periodic Interrupt Timer (PIT-RTI) devicetree Documentation, The PIT-RTI binding has already been used on Vybrid, so this add a binding document for it. Signed-off-by: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx> Cc: Shawn Guo <shawn.guo@xxxxxxxxxx> Cc: Jingchang Lu <b35083@xxxxxxxxxxxxx> --- .../devicetree/bindings/timer/fsl,vf610-pit.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/fsl,vf610-pit.txt diff --git a/Documentation/devicetree/bindings/timer/fsl,vf610-pit.txt b/Documentation/devicetree/bindings/timer/fsl,vf610-pit.txt new file mode 100644 index 0000000..67df182 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/fsl,vf610-pit.txt @@ -0,0 +1,21 @@ +Freescale Periodic Interrupt Timer (PIT-RTI) + +Required properties: + +- compatible : should be "fsl,vf610-pit" +- reg : Specifies base physical address and size of the register set for the + clock event device and clock source device. +- interrupts : Should be the clock event device interrupt. +- clocks : The clocks provided by the SoC to drive the timer, must contain an + entry for each entry in clock-names. +- clock-names : Must include the "pit" entry. + +Example: + +pit: pit@40037000 { + compatible = "fsl,vf610-pit"; + reg = <0x40037000 0x1000>; + interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_PIT>; + clock-names = "pit"; +}; -- 1.8.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html