Re: [PATCH 3/3] riscv: dts: Add DT node for SiFive FU540 Ethernet controller driver

[Sagar Kadam <sagar.kadam@xxxxxxxxxx>]

The series looks good to me.

Reviewed-by: Sagar Kadam <sagar.kadam@xxxxxxxxxx>

On Fri, Jul 19, 2019 at 4:41 PM Yash Shah <yash.shah@xxxxxxxxxx> wrote:
>
> DT node for SiFive FU540-C000 GEMGXL Ethernet controller driver added
>
> Signed-off-by: Yash Shah <yash.shah@xxxxxxxxxx>
> ---
>  arch/riscv/boot/dts/sifive/fu540-c000.dtsi          | 15 +++++++++++++++
>  arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts |  9 +++++++++
>  2 files changed, 24 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
> index cc73522..588669f0 100644
> --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
> +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
> @@ -231,5 +231,20 @@
>                         #size-cells = <0>;
>                         status = "disabled";
>                 };
> +               eth0: ethernet@10090000 {
> +                       compatible = "sifive,fu540-c000-gem";
> +                       interrupt-parent = <&plic0>;
> +                       interrupts = <53>;
> +                       reg = <0x0 0x10090000 0x0 0x2000
> +                              0x0 0x100a0000 0x0 0x1000>;
> +                       local-mac-address = [00 00 00 00 00 00];
> +                       clock-names = "pclk", "hclk";
> +                       clocks = <&prci PRCI_CLK_GEMGXLPLL>,
> +                                <&prci PRCI_CLK_GEMGXLPLL>;
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       status = "disabled";
> +               };
> +
>         };
>  };
> diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> index 0b55c53..85c17a7 100644
> --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> @@ -76,3 +76,12 @@
>                 disable-wp;
>         };
>  };
> +
> +&eth0 {
> +       status = "okay";
> +       phy-mode = "gmii";
> +       phy-handle = <&phy1>;
> +       phy1: ethernet-phy@0 {
> +               reg = <0>;
> +       };
> +};
> --
> 1.9.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv