From: Brian Masney <masneyb@xxxxxxxxxxxxx>
[ Upstream commit ef4db28c1f45cda6989bc8a8e45294894786d947 ]
The '#address-cells' and '#size-cells' properties were not defined in
the lm3630a bindings and would cause the following error when
attempting to validate the examples against the schema:
Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
'#address-cells', '#size-cells' do not match any of the regexes:
'^led@[01]$', 'pinctrl-[0-9]+'
Correct this by adding those two properties.
While we're here, move the ti,linear-mapping-mode property to the
led@[01] child nodes to correct the following validation error:
Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
led@0: 'ti,linear-mapping-mode' does not match any of the regexes:
'pinctrl-[0-9]+'
Fixes: 32fcb75c66a0 ("dt-bindings: backlight: Add lm3630a bindings")
Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
Reported-by: Rob Herring <robh+dt@xxxxxxxxxx>
Acked-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
Acked-by: Dan Murphy <dmurphy@xxxxxx>
[robh: also drop maxItems from child reg]
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../leds/backlight/lm3630a-backlight.yaml | 21 ++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
index 4d61fe0a98a4..dc129d9a329e 100644
--- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
@@ -23,16 +23,17 @@ properties:
reg:
maxItems: 1
- ti,linear-mapping-mode:
- description: |
- Enable linear mapping mode. If disabled, then it will use exponential
- mapping mode in which the ramp up/down appears to have a more uniform
- transition to the human eye.
- type: boolean
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
required:
- compatible
- reg
+ - '#address-cells'
+ - '#size-cells'
patternProperties:
"^led@[01]$":
@@ -48,7 +49,6 @@ patternProperties:
in this property. The two current sinks can be controlled
independently with both banks, or bank A can be configured to control
both sinks with the led-sources property.
- maxItems: 1
minimum: 0
maximum: 1
@@ -73,6 +73,13 @@ patternProperties:
minimum: 0
maximum: 255
+ ti,linear-mapping-mode:
+ description: |
+ Enable linear mapping mode. If disabled, then it will use exponential
+ mapping mode in which the ramp up/down appears to have a more uniform
+ transition to the human eye.
+ type: boolean
+
required:
- reg
--
2.20.1
