Cc devicetree@xxxxxxxxxxxxxxx list - Rob once informed us this gets
higher priority in his queue this way.
On 7/17/19 4:15 PM, Jean-Jacques Hiblot wrote:
> Add DT binding for led-backlight.
>
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
> ---
> .../bindings/leds/backlight/led-backlight.txt | 28 +++++++++++++++++++
> 1 file changed, 28 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> new file mode 100644
> index 000000000000..4c7dfbe7f67a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> @@ -0,0 +1,28 @@
> +led-backlight bindings
> +
> +This binding is used to describe a basic backlight device made of LEDs.
> +It can also be used to describe a backlight device controlled by the output of
> +a LED driver.
> +
> +Required properties:
> + - compatible: "led-backlight"
> + - leds: a list of LEDs
> +
> +Optional properties:
> + - brightness-levels: Array of distinct brightness levels. The levels must be
> + in the range accepted by the underlying LED devices.
> + This is used to translate a backlight brightness level
> + into a LED brightness level. If it is not provided, the
> + identity mapping is used.
> +
> + - default-brightness-level: The default brightness level.
> +
> +Example:
> +
> + backlight {
> + compatible = "led-backlight";
> +
> + leds = <&led1>, <&led2>;
> + brightness-levels = <0 4 8 16 32 64 128 255>;
> + default-brightness-level = <6>;
> + };
>
--
Best regards,
Jacek Anaszewski
