Hi,
On 2019-07-11 21:10, Gokul Sriram Palanisamy wrote:
IPQ8074 needs support for secure pil as well.
Also, currently only unified firmware is supported.
IPQ8074 supports split firmware for q6 and m3, so
adding support for that.
Gokul Sriram Palanisamy (12):
remoteproc: qcom: Add PRNG proxy clock
remoteproc: qcom: Add secure PIL support
remoteproc: qcom: Add support for split q6 + m3 wlan firmware
remoteproc: qcom: Add ssr subdevice identifier
remoteproc: qcom: Update regmap offsets for halt register
dt-bindings: clock: qcom: Add reset for WCSSAON
clk: qcom: Add WCSSAON reset
dt-bindings: mailbox: qom: Add ipq8074 APPS compatible
mailbox: qcom: Add support for IPQ8074 APCS
dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
arm64: dts: Add support for scm on IPQ8074 SoCs
arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
Also, this series is based on Govind’s,
“[v4] Add non PAS wcss Q6 support for QCS404”
https://www.spinics.net/lists/linux-remoteproc/msg03612.html
Regards,
Gokul
.../devicetree/bindings/firmware/qcom,scm.txt | 1 +
.../bindings/mailbox/qcom,apcs-kpss-global.txt | 1 +
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 131
+++++++++++++++++
drivers/clk/qcom/gcc-ipq8074.c | 1 +
drivers/mailbox/qcom-apcs-ipc-mailbox.c | 1 +
drivers/remoteproc/qcom_q6v5_wcss.c | 158
+++++++++++++++++----
include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 +
7 files changed, 264 insertions(+), 30 deletions(-)
