Hi, I still seem to be struggling to get this on anyone's radar. The Reviews/Acks have been given so this should be good to go in via the ARM tree as planned. http://lists.infradead.org/pipermail/linux-arm-kernel/2017-August/525561.html This series adds drivers for the L2 cache and DDR RAM ECC functionality as found on the MV78230/MV78x60 SoCs. Jan has tested these changes with the MV78460 (on a custom board with a DDR3 ECC DIMM), Chris has tested these changes with 88F6820 and 98dx3236 (both a custom boards with fixed DDR3 + ECC). Also contained in this series is an additional debugfs wrapper. Compared to the previous v8 series this has been rebased against v5.2-5628-g753c8d9b7d81 to avoid some conflicts related to debugfs API changes. Compared to the previous v7 series this has been rebased against 5.1 requiring some changes in the devicetree binding documentation. Compared to the previous v6 series I've dropped the marvell,ecc-disable property. Compared to the previous v5 series I've split the dt-binding documentation into its own patch and updated armada_xp_edac.c to use a SPDX license. Compared to the previous v4 series I've added my s-o-b to some of Jan's patches and rebased against v4.19.0. Compared to the previous v3 series, the following changes have been made: - Use shorter names for the AURORA ECC and parity registers - Numerous formatting changes to edac/armada_xp.c (as requested by Boris) - Added support for Armada-38x and 98dx3236 SoCs Compared to the previous v2 series, the following changes have been made: - Allocate EDAC structures later during probing and drop devres support patches (requested by Boris) - Make drvdata->width usage consistent according to the comment (suggested by Chris) Compared to the previous v1 series, the following changes have been made: - Add the aurora-l2 register defines earlier in the series (suggested by Russell King and Gregory CLEMENT ) - Changed the DT vendor prefix from "arm" to "marvell" for the ecc-enable/disable properties on the aurora-l2 (suggested by Russell King) - Fix some warnings reported by checkpatch Compared to the original RFC series, the following changes have been made: - Integrated Chris' patches for parity and ECC configuration via DT - Merged the DDR RAM and L2 cache drivers (as requested by Boris, analogous to fsl_ddr_edac.c and mpc85xx_edac.c) - Added myself to MAINTAINERS (requested by Boris) - L2 cache: Track the msg size and use snprintf (review comment by Chris) - L2 cache: Split error injection from the check function (review comment by Chris) - DDR RAM: Allow 16 bit width in addition to 32 and 64 bit (review comment by Chris) - Use of_match_ptr() (review comments by Chris) - Minor checkpatch cleanups Chris Packham (4): ARM: l2x0: support parity-enable/disable on aurora dt-bindings: ARM: document marvell,ecc-enable binding ARM: l2x0: add marvell,ecc-enable property for aurora EDAC: armada_xp: Add support for more SoCs Jan Luebbe (4): ARM: aurora-l2: add prefix to MAX_RANGE_SIZE ARM: aurora-l2: add defines for parity and ECC registers EDAC: Add missing debugfs_create_x32 wrapper EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC .../devicetree/bindings/arm/l2c2x0.yaml | 4 + MAINTAINERS | 6 + .../include/asm/hardware/cache-aurora-l2.h | 50 +- arch/arm/mm/cache-l2x0.c | 16 +- drivers/edac/Kconfig | 7 + drivers/edac/Makefile | 1 + drivers/edac/armada_xp_edac.c | 635 ++++++++++++++++++ drivers/edac/debugfs.c | 11 + drivers/edac/edac_module.h | 4 + 9 files changed, 731 insertions(+), 3 deletions(-) create mode 100644 drivers/edac/armada_xp_edac.c -- 2.22.0
