From: Li Jun <jun.li@xxxxxxx>
The correct clock for "bus_early", "ref", "suspend" should be:
IMX8MQ_CLK_USB1_CTRL_ROOT, IMX8MQ_CLK_USB_CORE_REF, IMX8MQ_CLK_32K,
especially we may need the right suspend clock rate to set register
in controller driver.
Signed-off-by: Li Jun <jun.li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index d09b808..a43ddac 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -901,9 +901,9 @@
usb_dwc3_0: usb@38100000 {
compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
reg = <0x38100000 0x10000>;
- clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+ clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>,
<&clk IMX8MQ_CLK_USB_CORE_REF>,
- <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>;
+ <&clk IMX8MQ_CLK_32K>;
clock-names = "bus_early", "ref", "suspend";
assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
<&clk IMX8MQ_CLK_USB_CORE_REF>;
@@ -933,9 +933,9 @@
usb_dwc3_1: usb@38200000 {
compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
reg = <0x38200000 0x10000>;
- clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+ clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
<&clk IMX8MQ_CLK_USB_CORE_REF>,
- <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>;
+ <&clk IMX8MQ_CLK_32K>;
clock-names = "bus_early", "ref", "suspend";
assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
<&clk IMX8MQ_CLK_USB_CORE_REF>;
--
2.7.4
