On 09.07.19 10:41, Jerry-ch Chen wrote:
Hi,
> diff --git a/drivers/media/platform/mtk-isp/fd/mtk_fd.h b/drivers/media/platform/mtk-isp/fd/mtk_fd.h
> new file mode 100644
> index 0000000..289999b
> --- /dev/null
> +++ b/drivers/media/platform/mtk-isp/fd/mtk_fd.h
> @@ -0,0 +1,157 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +//
> +// Copyright (c) 2018 MediaTek Inc.
> +
> +#ifndef __MTK_FD_HW_H__
> +#define __MTK_FD_HW_H__
> +
> +#include <linux/io.h>
> +#include <linux/types.h>
> +#include <linux/platform_device.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +#define MTK_FD_OUTPUT_MIN_WIDTH 26U
> +#define MTK_FD_OUTPUT_MIN_HEIGHT 26U
> +#define MTK_FD_OUTPUT_MAX_WIDTH 640U
> +#define MTK_FD_OUTPUT_MAX_HEIGHT 480U
> +
> +/* Control the user defined image widths and heights
> + * to be scaled and performed face detection in FD HW.
> + * MTK FD support up to 14 user defined image sizes to perform face detection.
> + */
> +#define V4L2_CID_MTK_FD_SCALE_IMG_WIDTH (V4L2_CID_USER_MTK_FD_BASE + 1)
> +#define V4L2_CID_MTK_FD_SCALE_IMG_HEIGHT (V4L2_CID_USER_MTK_FD_BASE + 2)
I've got a *really* bad feeling about introducing chip specific
uapi stuff. (by the way: uapi stuff belongs into include/uapi/...)
Maybe you could tell us what that's *really* about, so we can find some
standard / chip-independent api for these things. That's one of the
major point of the kernel: hardware abstraction.
> +#define ENABLE_FD 0x111
> +#define FD_HW_ENABLE 0x4
> +#define FD_INT_EN 0x15c
> +#define FD_INT 0x168
> +#define FD_RESULT 0x178
> +#define FD_IRQ_MASK 0x001
> +
> +#define RS_MAX_BUF_SIZE 2288788
> +#define FD_MAX_SPEEDUP 7
> +#define FD_MAX_POSE_VAL 0xfffffffffffffff
> +#define FD_DEF_POSE_VAL 0x3ff
> +#define MAX_FD_SEL_NUM 1026
If that file is supposed to be included by anything beyond the driver
itself, we need proper prefixing. (same for anything else in here)
> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
> index 3dcfc61..eae876e 100644
> --- a/include/uapi/linux/v4l2-controls.h
> +++ b/include/uapi/linux/v4l2-controls.h
> @@ -192,6 +192,10 @@ enum v4l2_colorfx {
> * We reserve 16 controls for this driver. */
> #define V4L2_CID_USER_IMX_BASE (V4L2_CID_USER_BASE + 0x10b0)
>
> +/* The base for the mediatek FD driver controls */
> +/* We reserve 16 controls for this driver. */
> +#define V4L2_CID_USER_MTK_FD_BASE (V4L2_CID_USER_BASE + 0x10d0)
Why only the base, but not the actual IDs in uapi ?
--mtx
--
Enrico Weigelt, metux IT consult
Free software and Linux embedded engineering
info@xxxxxxxxx -- +49-151-27565287
