>Hi,
>
>Pawel Laszczak <pawell@xxxxxxxxxxx> writes:
>>>> +void cdns3_role_stop(struct cdns3 *cdns)
>>>
>>>not static? Why is it so that _start() is static but _stop() is not?
>>>Looks fishy
>>
>> This function is used in cdns3_role_stop in debugfs.c file so it can't
>> be static.
>
>it's still super fishy. Why don't you need _start() from debugfs.c? In
>any case, the role framework would remove the need for any of this, I
>suppose.
Yes, I'm going to use the role framework so it will be probably changed.
>
>>>> +static int cdns3_idle_role_start(struct cdns3 *cnds)
>>>> +{ /* Hold PHY in RESET */
>>>
>>>huh?
>>>
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static void cdns3_idle_role_stop(struct cdns3 *cnds)
>>>> +{
>>>> + /* Program Lane swap and bring PHY out of RESET */
>>>
>>>double huh?
>>>
>>
>> These functions were added for consistency with FSM described in controller specification.
>> Yes, I know that you don't like empty functions :), but it could be helpful in
>> understanding how this controller work.
>
>frankly, it really doesn't. An empty function doesn't really help IMHO.
I will change it.
>
>>>> +static const char *const cdns3_mode[] = {
>>>> + [USB_DR_MODE_UNKNOWN] = "unknown",
>>>> + [USB_DR_MODE_OTG] = "otg",
>>>> + [USB_DR_MODE_HOST] = "host",
>>>> + [USB_DR_MODE_PERIPHERAL] = "device",
>>>> +};
>>>
>>>don't we have a generic version of this under usb/common ?
>>>
>> Yes, there is a similar array, but it is defined also as static
>> and there is no function for converting value to string.
>> There is only function for converting string to value.
>
>right. You can add the missing interface generically instead of
>duplicating the enumeration.
Patch adding such extension has posted.
>
>> There is also:
>> [USB_DR_MODE_UNKNOWN] = "",
>> Instead of:
>> [USB_DR_MODE_UNKNOWN] = "unknown",
>>
>> So, for USB_DR_MODE_UNKNOWN user will not see anything information.
>
>But that's what "unknown" means :-) We don't know the information.
>
>>>> +static irqreturn_t cdns3_drd_irq(int irq, void *data)
>>>> +{
>>>> + irqreturn_t ret = IRQ_NONE;
>>>> + struct cdns3 *cdns = data;
>>>> + u32 reg;
>>>> +
>>>> + if (cdns->dr_mode != USB_DR_MODE_OTG)
>>>> + return ret;
>>>> +
>>>> + reg = readl(&cdns->otg_regs->ivect);
>>>> +
>>>> + if (!reg)
>>>> + return ret;
>>>> +
>>>> + if (reg & OTGIEN_ID_CHANGE_INT) {
>>>> + dev_dbg(cdns->dev, "OTG IRQ: new ID: %d\n",
>>>> + cdns3_get_id(cdns));
>>>> +
>>>> + ret = IRQ_HANDLED;
>>>> + }
>>>> +
>>>> + if (reg & (OTGIEN_VBUSVALID_RISE_INT | OTGIEN_VBUSVALID_FALL_INT)) {
>>>> + dev_dbg(cdns->dev, "OTG IRQ: new VBUS: %d\n",
>>>> + cdns3_get_vbus(cdns));
>>>> +
>>>> + ret = IRQ_HANDLED;
>>>> + }
>>>> +
>>>> + if (ret == IRQ_HANDLED)
>>>> + queue_work(system_freezable_wq, &cdns->role_switch_wq);
>>>> +
>>>> + writel(~0, &cdns->otg_regs->ivect);
>>>> + return ret;
>>>> +}
>>>
>>>seems like you could use threaded irq to avoid this workqueue.
>>
>>
>> This function is also called in cdns3_mode_write (debugfs.c file),
>> therefor after changing it to threaded irq I will still need workqueue.
>
>Why? debugfs writes are not atomic. They run in process context, right?
>Just don't disable interrupts while running this and you should be fine.
Yes, It should work.
>
>>>> + cdns->desired_dr_mode = cdns->dr_mode;
>>>> + cdns->current_dr_mode = USB_DR_MODE_UNKNOWN;
>>>> +
>>>> + ret = devm_request_threaded_irq(cdns->dev, cdns->otg_irq,
>>>> + cdns3_drd_irq,
>>>> + NULL, IRQF_SHARED,
>>>
>>>if you don't have a threaded handler, you should set IRQF_ONESHOT. I
>>>would prefer if you implement a threaded handler that doesn't require
>>>IRQF_ONESHOT, though.
>>>
>>
>> IRQF_ONESHOT can be used only in threaded handled.
>> "
>> * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
>> * Used by threaded interrupts which need to keep the
>> * irq line disabled until the threaded handler has been run.
>> "
>
>so?
I don't understand why If I don't have threaded handler why I need IRQF_ONESHOT.
Why interrupt cannot be reenabled after hardirq handler finished ?
I do not use threaded handler so this flag seem unnecessary.
>
>>>> + } else {
>>>> + struct usb_request *request;
>>>> +
>>>> + if (priv_dev->eps[index]->flags & EP_WEDGE) {
>>>> + cdns3_select_ep(priv_dev, 0x00);
>>>> + return 0;
>>>> + }
>>>> +
>>>> + cdns3_dbg(priv_ep->cdns3_dev, "Clear Stalled endpoint %s\n",
>>>> + priv_ep->name);
>>>
>>>why do you need your own wrapper around dev_dbg()? This looks quite unnecessary.
>>
>> It's generic function used for adding message to trace.log. It's not wrapper to dev_dbg
>>
>> void cdns3_dbg(struct cdns3_device *priv_dev, const char *fmt, ...)
>> {
>> struct va_format vaf;
>> va_list args;
>>
>> va_start(args, fmt);
>> vaf.fmt = fmt;
>> vaf.va = &args;
>> trace_cdns3_log(priv_dev, &vaf);
>> va_end(args);
>> }
>
>oh. Don't do it like that. Add a proper trace event that actually
>decodes the information you want. These random messages will give you
>trouble in the future. I had this sort of construct in dwc3 for a while
>and it became clear that it's a bad idea. It's best to have trace events
>that decode information coming from the HW. That way your trace logs
>have a "predictable" shape/format and you can easily find problem areas.
Ok , I will change this.
I used such solution because I didn't want to create to many trace events.
I used it only for rely used messages.
Thanks,
Regards
Pawel
>
>--
>balbi
