Extend the hip04_eth driver to support HI13X1_GMAC. Enable it with CONFIG_HI13X1_GMAC option. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@xxxxxxxxxx> --- drivers/net/ethernet/hisilicon/Kconfig | 10 ++++++++ drivers/net/ethernet/hisilicon/hip04_eth.c | 37 ++++++++++++++++++++++++------ 2 files changed, 40 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig index a0d780c..3892a20 100644 --- a/drivers/net/ethernet/hisilicon/Kconfig +++ b/drivers/net/ethernet/hisilicon/Kconfig @@ -46,6 +46,16 @@ config HIP04_ETH If you wish to compile a kernel for a hardware with hisilicon p04 SoC and want to use the internal ethernet then you should answer Y to this. +config HI13X1_GMAC + bool "Hisilicon HI13X1 Network Device Support" + depends on HIP04_ETH + help + If you wish to compile a kernel for a hardware with hisilicon hi13x1_gamc + then you should answer Y to this. This makes this driver suitable for use + on certain boards such as the HI13X1. + + If you are unsure, say N. + config HNS_MDIO tristate select PHYLIB diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c index e1f2978..2b5112b 100644 --- a/drivers/net/ethernet/hisilicon/hip04_eth.c +++ b/drivers/net/ethernet/hisilicon/hip04_eth.c @@ -33,10 +33,23 @@ #define GE_MODE_CHANGE_REG 0x1b4 #define GE_RECV_CONTROL_REG 0x1e0 #define GE_STATION_MAC_ADDRESS 0x210 -#define PPE_CFG_CPU_ADD_ADDR 0x580 -#define PPE_CFG_MAX_FRAME_LEN_REG 0x408 + #define PPE_CFG_BUS_CTRL_REG 0x424 #define PPE_CFG_RX_CTRL_REG 0x428 + +#if defined(CONFIG_HI13X1_GMAC) +#define PPE_CFG_CPU_ADD_ADDR 0x6D0 +#define PPE_CFG_MAX_FRAME_LEN_REG 0x500 +#define PPE_CFG_RX_PKT_MODE_REG 0x504 +#define PPE_CFG_QOS_VMID_GEN 0x520 +#define PPE_CFG_RX_PKT_INT 0x740 +#define PPE_INTEN 0x700 +#define PPE_INTSTS 0x708 +#define PPE_RINT 0x704 +#define PPE_CFG_STS_MODE 0x880 +#else +#define PPE_CFG_CPU_ADD_ADDR 0x580 +#define PPE_CFG_MAX_FRAME_LEN_REG 0x408 #define PPE_CFG_RX_PKT_MODE_REG 0x438 #define PPE_CFG_QOS_VMID_GEN 0x500 #define PPE_CFG_RX_PKT_INT 0x538 @@ -44,6 +57,8 @@ #define PPE_INTSTS 0x608 #define PPE_RINT 0x604 #define PPE_CFG_STS_MODE 0x700 +#endif /* CONFIG_HI13X1_GMAC */ + #define PPE_HIS_RX_PKT_CNT 0x804 /* REG_INTERRUPT */ @@ -93,18 +108,26 @@ #define GE_RX_PORT_EN BIT(1) #define GE_TX_PORT_EN BIT(2) -#define PPE_CFG_STS_RX_PKT_CNT_RC BIT(12) - #define PPE_CFG_RX_PKT_ALIGN BIT(18) -#define PPE_CFG_QOS_VMID_MODE BIT(14) + +#if defined(CONFIG_HI13X1_GMAC) +#define PPE_CFG_QOS_VMID_GRP_SHIFT 4 +#define PPE_CFG_RX_CTRL_ALIGN_SHIFT 7 +#define PPE_CFG_STS_RX_PKT_CNT_RC BIT(0) +#define PPE_CFG_QOS_VMID_MODE BIT(15) +#define PPE_CFG_BUS_LOCAL_REL (BIT(9) | BIT(15) | BIT(19) | BIT(23)) +#else #define PPE_CFG_QOS_VMID_GRP_SHIFT 8 +#define PPE_CFG_RX_CTRL_ALIGN_SHIFT 11 +#define PPE_CFG_STS_RX_PKT_CNT_RC BIT(12) +#define PPE_CFG_QOS_VMID_MODE BIT(14) +#define PPE_CFG_BUS_LOCAL_REL BIT(14) +#endif /* CONFIG_HI13X1_GMAC */ #define PPE_CFG_RX_FIFO_FSFU BIT(11) #define PPE_CFG_RX_DEPTH_SHIFT 16 #define PPE_CFG_RX_START_SHIFT 0 -#define PPE_CFG_RX_CTRL_ALIGN_SHIFT 11 -#define PPE_CFG_BUS_LOCAL_REL BIT(14) #define PPE_CFG_BUS_BIG_ENDIEN BIT(0) #define RX_DESC_NUM 128 -- 1.8.5.6
