Add the 'realtek,eee-led-mode-disable' property to disable EEE
LED mode on Realtek PHYs that support it.
Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
TODO: adapt PHY core to deal with optional compatible strings
Changes in v3:
- added entry for compatible string
- added compatible string to example
- mention that the new property is only available for RTL8211E
Changes in v2:
- document 'realtek,eee-led-mode-disable' instead of
'realtek,enable-ssc' in the initial version
---
.../devicetree/bindings/net/realtek.txt | 31 +++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/realtek.txt
diff --git a/Documentation/devicetree/bindings/net/realtek.txt b/Documentation/devicetree/bindings/net/realtek.txt
new file mode 100644
index 000000000000..db0333f23fec
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/realtek.txt
@@ -0,0 +1,31 @@
+Realtek PHY properties.
+
+This document describes properties of Realtek PHYs.
+
+Optional properties:
+- compatible: should be one of the following:
+ "realtek,rtl8201cp", "realtek,rtl8201f", "realtek,rtl8211",
+ "realtek,rtl8211b", "realtek,rtl8211c", "realtek,rtl8211dn",
+ "realtek,rtl8211e", "realtek,rtl8211f", "rtl8366rb"
+
+ the property is required if any of the properties are specified that
+ are only supported for certain Realtek PHYs.
+
+- realtek,eee-led-mode-disable: Disable EEE LED mode on this port.
+
+ Only supported for "realtek,rtl8211e".
+
+
+Example:
+
+mdio0 {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@1 {
+ compatible = "realtek,rtl8211e";
+ reg = <1>;
+ realtek,eee-led-mode-disable;
+ };
+};
--
2.22.0.410.gd8fdbe21b5-goog
