Hi, Viresh > On 08-07-19, 08:43, Anson Huang wrote: > > Hi, Viresh > > > > > On 04-07-19, 07:49, Leonard Crestez wrote: > > > > On 7/4/2019 9:23 AM, Anson.Huang@xxxxxxx wrote: > > > > > From: Anson Huang <Anson.Huang@xxxxxxx> > > > > > > > > > > Assign highest OPP as suspend OPP to reduce suspend/resume > > > > > latency on i.MX8MM. > > > > > > > > > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> > > > > > --- > > > > > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 1 + > > > > > 1 file changed, 1 insertion(+) > > > > > > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi > > > > > b/arch/arm64/boot/dts/freescale/imx8mm.dtsi > > > > > index b11fc5e..3a62407 100644 > > > > > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi > > > > > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi > > > > > @@ -136,6 +136,7 @@ > > > > > opp-microvolt = <1000000>; > > > > > opp-supported-hw = <0x8>, <0x3>; > > > > > clock-latency-ns = <150000>; > > > > > + opp-suspend; > > > > > }; > > > > > }; > > > > > > > > What if the highest OPP is unavailable due to speed grading? > > > > > > What does this exactly mean ? How is the OPP made unavailable in > > > your case ? > > > > That is because in i.MX8M series SoCs, the speed grading and market > > segment fuses settings could affect the OPP defined in DT, in a word, > > all possible OPPs are defined in DT, but each parts could ONLY select > > some of them to be working OPPs, so if the "opp-suspend" is added for > > 1 OPP in DT, if the part's speed grading or market segment fuse settings > make that OPP as unavailable, then that "opp-suspend" > > is NOT working at all. > > How is this selection done ? You using some OPP helper or something else ? Each OPP has "opp-supported-hw" property as below, the first value needs to be checked with speed grading fuse, and the second one needs to be checked with market segment fuse, ONLY both of them passed, then this OPP is supported. It calls dev_pm_opp_set_supported_hw() to tell OPP framework to parse the OPP table, this is my understanding. opp-supported-hw = <0x8>, <0x3>; thanks, Anson
