Re: [PATCH 2/2] drm/panel: simple: Add support for Sharp LD-D5116Z01B panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jeffrey.

Patch looks good, but there is a few fields that are not initialized.
Did you forget them, or are they not needed?

On Fri, Jul 05, 2019 at 09:57:55AM -0700, Jeffrey Hugo wrote:
> The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution.
> 
> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx>
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 5a93c4edf1e4..e6f578667324 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2354,6 +2354,29 @@ static const struct panel_desc samsung_ltn140at29_301 = {
>  	},
>  };
>  
> +static const struct drm_display_mode sharp_ld_d5116z01b_mode = {
> +	.clock = 168480,
> +	.hdisplay = 1920,
> +	.hsync_start = 1920 + 48,
> +	.hsync_end = 1920 + 48 + 32,
> +	.htotal = 1920 + 48 + 32 + 80,
> +	.vdisplay = 1280,
> +	.vsync_start = 1280 + 3,
> +	.vsync_end = 1280 + 3 + 10,
> +	.vtotal = 1280 + 3 + 10 + 57,
> +	.vrefresh = 60,
> +};
No .flags? Is it not needed for an eDP panel?

> +
> +static const struct panel_desc sharp_ld_d5116z01b = {
> +	.modes = &sharp_ld_d5116z01b_mode,
> +	.num_modes = 1,
> +	.bpc = 8,
> +	.size = {
> +		.width = 260,
> +		.height = 120,
> +	},
> +};
No .bus_format?
No .bus_flags?

	Sam



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux