On April 16, 2014 5:55:17 AM GMT+01:00, Chanwoo Choi <cw00.choi@xxxxxxxxxxx> wrote:
>Hi Sachin,
>
>On 04/16/2014 01:44 PM, Chanwoo Choi wrote:
>> Hi Sachin,
>>
>> On 04/16/2014 12:48 PM, Sachin Kamat wrote:
>>> Hi Chanwoo,
>>>
>>> On 14 April 2014 14:37, Chanwoo Choi <cw00.choi@xxxxxxxxxxx> wrote:
>>>> This patch control special clock for ADC in Exynos series's FSYS
>block.
>>>> If special clock of ADC is registerd on clock list of common clk
>framework,
>>>> Exynos ADC drvier have to control this clock.
>>>>
>>>> Exynos3250/Exynos4/Exynos5 has 'adc' clock as following:
>>>> - 'adc' clock: bus clock for ADC
>>>>
>>>> Exynos3250 has additional 'sclk_tsadc' clock as following:
>>>> - 'sclk_tsadc' clock: special clock for ADC which provide clock to
>internal ADC
>>>>
>>>> Exynos 4210/4212/4412 and Exynos5250/5420 has not included
>'sclk_tsadc' clock
>>>> in FSYS_BLK. But, Exynos3250 based on Cortex-A7 has only included
>'sclk_tsadc'
>>>> clock in FSYS_BLK.
>>>>
>>>> Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
>>>> Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
>>>> Cc: Naveen Krishna Chatradhi
>>>> Cc: linux-iio@xxxxxxxxxxxxxxx
>>>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>>>> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>>>> ---
>>>> drivers/iio/adc/exynos_adc.c | 54
>+++++++++++++++++++++++++++++++++-----------
>>>> 1 file changed, 41 insertions(+), 13 deletions(-)
>>>>
>>>> diff --git a/drivers/iio/adc/exynos_adc.c
>b/drivers/iio/adc/exynos_adc.c
>>>> index d25b262..3c99243 100644
>>>> --- a/drivers/iio/adc/exynos_adc.c
>>>> +++ b/drivers/iio/adc/exynos_adc.c
>>>> @@ -40,8 +40,9 @@
>>>> #include <linux/iio/driver.h>
>>>>
>>>> enum adc_version {
>>>> - ADC_V1,
>>>> - ADC_V2
>>>> + ADC_V1 = 0x1,
>>>> + ADC_V2 = 0x2,
>>>> + ADC_V3 = (ADC_V1 | ADC_V2),
>>>
>>> Can't this be simply 0x3? Or is this not really a h/w version?
>>
>> Even thought ADC_V3 isn't h/w revision, ADC_V3 include all featues of
>ADC_V2
>> and only one difference of clock(sclk_tsadc) from ADC_V2.
>> I want to describethat ADC_V3 include ADC_V2 feature So, I add as
>following:
>> >> + ADC_V3 = (ADC_V1 | ADC_V2),
>>
>>>
>>>> };
>>>>
>>>> /* EXYNOS4412/5250 ADC_V1 registers definitions */
>>>> @@ -88,6 +89,7 @@ struct exynos_adc {
>>>> void __iomem *regs;
>>>> void __iomem *enable_reg;
>>>> struct clk *clk;
>>>> + struct clk *sclk;
>>>> unsigned int irq;
>>>> struct regulator *vdd;
>>>>
>>>> @@ -100,6 +102,7 @@ struct exynos_adc {
>>>> static const struct of_device_id exynos_adc_match[] = {
>>>> { .compatible = "samsung,exynos-adc-v1", .data = (void
>*)ADC_V1 },
>>>> { .compatible = "samsung,exynos-adc-v2", .data = (void
>*)ADC_V2 },
>>>> + { .compatible = "samsung,exynos-adc-v3", .data = (void
>*)ADC_V3 },
>>>> {},
>>>> };
>>>> MODULE_DEVICE_TABLE(of, exynos_adc_match);
>>>> @@ -128,7 +131,7 @@ static int exynos_read_raw(struct iio_dev
>*indio_dev,
>>>> mutex_lock(&indio_dev->mlock);
>>>>
>>>> /* Select the channel to be used and Trigger conversion */
>>>> - if (info->version == ADC_V2) {
>>>> + if (info->version & ADC_V2) {
>>>
>>> So, now this would be applicable for ADC_V3 too, right?
>
>ADC_V3 isn't h/w version. So, I think this code is proper instead of
>using ADC_V3 direclty.
>I want to use ADC_V3 version on checking clock(sclk_tsadc).
>
>>>
>>>
>>>> con2 = readl(ADC_V2_CON2(info->regs));
>>>> con2 &= ~ADC_V2_CON2_ACH_MASK;
>>>> con2 |= ADC_V2_CON2_ACH_SEL(chan->address);
>>>> @@ -165,7 +168,7 @@ static irqreturn_t exynos_adc_isr(int irq, void
>*dev_id)
>>>> info->value = readl(ADC_V1_DATX(info->regs)) &
>>>> ADC_DATX_MASK;
>>>> /* clear irq */
>>>> - if (info->version == ADC_V2)
>>>> + if (info->version & ADC_V2)
>>>> writel(1, ADC_V2_INT_ST(info->regs));
>>>> else
>>>> writel(1, ADC_V1_INTCLR(info->regs));
>>>> @@ -226,11 +229,25 @@ static int exynos_adc_remove_devices(struct
>device *dev, void *c)
>>>> return 0;
>>>> }
>>>>
>>>> +static void exynos_adc_enable_clock(struct exynos_adc *info, bool
>enable)
>>>> +{
>>>> + if (enable) {
>>>> + clk_prepare_enable(info->clk);
>>>
>>> This could fail. Is it OK without any checks?
>>
>> OK, I'll check return value.
>
>Do you want to check return value always?
>I think again, Some device drivers in mainline would not check
>return value of clock function. If maintainer confirm this
>modification,
>I'll fix it as your comment.
Its general good practice to check all return values. Even if a function doesn't return an
error now, it might in future. There is lots of old or lazy code out there doing many much
stranger things than this!
So yes, please check return values and pass on up the call stack if an error.
>
>Best Regards,
>Chanwoo Choi
>--
>To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>the body of a message to majordomo@xxxxxxxxxxxxxxx
>More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
