Re: [PATCH v7 00/14] Rockchip ISP1 Driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 7/3/19 4:08 PM, Helen Koike wrote:
> Hello,
> 
> I'm re-sending a new version of ISP(Camera) v4l2 driver for rockchip
> rk3399 SoC.
> 
> It is not perfect yet (see known issues below), but I'm sending in case
> some other people already wants to start playing with it.
> I believe de main design is ok (please let me know if
> it is not) and it would be great to get some reviews already.
> 
> This patchset is also available at:
> https://gitlab.collabora.com/koike/linux/tree/rockchip/isp/v7
> 
> Libcamera patched to work with this version:
> https://gitlab.collabora.com/koike/libcamera
> (I'll also sent it to the libcamera dev mailing list)
> 
> I tested on the rockpi 4 with a rpi v1.3 sensor and also with the
> Scarlet Chromebook.
> Images from the Scarlet are a bit dark and green for some reason, but I
> believe it's a problem in the sensor's drivers as images from the
> rockpi looks ok.

Hi,

[dropping some people in CC, I should be more careful with patman]

Just to be easier to review, follow below the media topology in the Scarlet:

media-ctl --print-dot -> file available at: http://ix.io/1NIH

root@debian:~# media-ctl -p
Media controller API version 5.2.0

Media device information
------------------------
driver          rkisp1
model           rkisp1
serial
bus info        platform: rkisp1
hw revision     0x0
driver version  5.2.0

Device topology
- entity 1: rkisp1-isp-subdev (4 pads, 6 links)
            type V4L2 subdev subtype Unknown flags 0
            device node name /dev/v4l-subdev0
        pad0: Sink
                [fmt:SBGGR10_1X10/1920x1080 field:none
                 crop.bounds:(0,0)/1920x1080
                 crop:(0,0)/800x600]
                <- "ov2685 7-003c":0 []
                <- "ov5695 7-0036":0 [ENABLED]
        pad1: Sink
                [fmt:FIXED/800x600 field:none]
                <- "rkisp1-input-params":0 []
        pad2: Source
                [fmt:YUYV8_2X8/800x600 field:none
                 crop.bounds:(0,0)/800x600
                 crop:(0,0)/800x600]
                -> "rkisp1_selfpath":0 []
                -> "rkisp1_mainpath":0 [ENABLED]
        pad3: Source
                [fmt:FIXED/800x600 field:none]
                -> "rkisp1-statistics":0 []

- entity 6: rkisp1_mainpath (1 pad, 1 link)
            type Node subtype V4L flags 0
            device node name /dev/video0
        pad0: Sink
                <- "rkisp1-isp-subdev":2 [ENABLED]

- entity 10: rkisp1_selfpath (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video1
        pad0: Sink
                <- "rkisp1-isp-subdev":2 []

- entity 14: rkisp1-statistics (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video2
        pad0: Sink
                <- "rkisp1-isp-subdev":3 []

- entity 18: rkisp1-input-params (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video3
        pad0: Source
                -> "rkisp1-isp-subdev":1 []

- entity 22: ov2685 7-003c (1 pad, 1 link)
             type V4L2 subdev subtype Sensor flags 0
             device node name /dev/v4l-subdev1
        pad0: Source
                [fmt:SBGGR10_1X10/1600x1200 field:none]
                -> "rkisp1-isp-subdev":0 []

- entity 24: ov5695 7-0036 (1 pad, 1 link)
             type V4L2 subdev subtype Sensor flags 0
             device node name /dev/v4l-subdev2
        pad0: Source
                [fmt:SBGGR10_1X10/1920x1080 field:none]
                -> "rkisp1-isp-subdev":0 [ENABLED]


Thanks
Helen

> 
> The main differences from previous version are (in a macro pov):
> ----------------------------------------------------------------
> - dphy specific code migrated to drivers/phy
> - design change: droped the subdevice for the interface. Now, in the
> media topology, the sensors connect directly to the ISP1.
> - v4l2-compliance fixes
> - dropped rk3288 (as I'm not testing it)
> - dropped txrx dphy support (as I'm not testing it and it requires a bit
> more work to support dsi too)
> - interrupts and hw config fixes
> - minor bug fixes and cleanups
> - I added myself in the MAINTAINERS, as I'm not sure if previous people
> still wants to maintain it, please let me know if I should keep the old
> names there.
> 
> Known issues:
> -------------
> - Reloading the module doesn't work (there is some missing cleanup when
> unloading)
> - When capturing in bayer format, changing the size doesn't seem to
> affect the image.
> - crop needs more tests
> - v4l2-compliance error:
>         fail: v4l2-test-controls.cpp(824): subscribe event for control 'Image Processing Controls' failed
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> It seems that if controls are supported, v4l2-compliance says that
> controls of type 'Image Processing Controls' are mandatory, is this
> correct?
> - It seems there are still some issues with interrupts, but I couldn't
> isolate them yet.
> 
> Reasoning for the design change:
> --------------------------------
> In the previous version, the isp subdevice call the mipidphy_g_mbus
> from rkisp1.c, so it can get
> informations from the sensor such as the type of mbus (V4L2_MBUS_BT656,
> V4L2_MBUS_PARALLEL or V4L2_MBUS_CSI2_CPHY), the number of csi2 lanes,
> flags (V4L2_MBUS_PCLK_SAMPLE_RISING, V4L2_MBUS_VSYNC_ACTIVE_LOW or
> V4L2_MBUS_HSYNC_ACTIVE_LOW). And the isp driver uses those info to configure
> the hardware properly.
> 
> These information come from the DT node of the sensor. And the current
> implementation is propagating this information from the sensor to the isp
> through this mipidphy_g_mbus_config() (thus the hack)
> 
> * 1st attempt to solve this hack) Separating the interface code from the isp.
> 
> With the topology:
> 
> isp -> csi2 -> sensor
> 
> I was trying to migrate the CSI2 hardware configuration to the csi2 subdevice code.
> But the problem I found was that in the DT, the csi2 regs is in the middle of the isp1
> regs, and declaring the same "regs = <>" in both nodes (isp0 and csi2) is no good.
> 
> * 2nd attempt) flatening the DT
> So instead of having two DT nodes (isp0 and csi2), we can have a single node, similar
> to omap3isp.
> And we can have a property, "rk,phy-type" that defines the interface (csi2, bt656 or parallel).
> 
> But, now my question is: can the isp be connected to multiple interfaces at a
> time? If yes, then this is not a good solution (as we won't be able to describe
> multiple interfaces in the DT node).
> 
> * 3rd attemp - WIP) get rid of the interface subdevice (chosen design)
> Is there a reason to have the topology like:
> 
> isp -> interface - - -> sensor1
>         |   |-------->  sensor2
>         | - - - - - - > sensor3
> 
> (only one sensor can be active at a time)
> 
> ?
> 
> Would it be ok if I just hide the interface from the topology? Like:
> 
> isp - - - - - -> sensor1
> | |----------->  sensor2
> |- - - - - - - > sensor3
> 
> Like this, I could cleanup a bunch of v4l2 code from the interface node,
> the isp would know the active sensor (and its configs), and it can
> configure everything itself.
> 
> I don't really see a big reason to expose the interface (csi2,
> bt656 or parallel) in the topology.
> Unless I'm missing something.
> 
> Previous changelog:
> -------------------
> 
> changes in V6:
>   - add mipi txrx phy support
>   - remove bool and enum from uapi header
>   - add buf_prepare op
>   - correct some spelling problems
>   - return all queued buffers when starting stream failed
> 
> changes in V5: Sync with local changes,
>   - fix the SP height limit
>   - speed up the second stream capture
>   - the second stream can't force sync for rsz when start/stop streaming
>   - add frame id to param vb2 buf
>   - enable luminance maximum threshold
> 
> changes in V4:
>   - fix some bugs during development
>   - move quantization settings to rkisp1 subdev
>   - correct some spelling problems
>   - describe ports in dt-binding documents
> 
> changes in V3:
>   - add some comments
>   - fix wrong use of v4l2_async_subdev_notifier_register
>   - optimize two paths capture at a time
>   - remove compose
>   - re-struct headers
>   - add a tmp wiki page: http://opensource.rock-chips.com/wiki_Rockchip-isp1
> 
> changes in V2:
>   mipi-phy:
>     - use async probing
>     - make it be a child device of the GRF
>   isp:
>     - add dummy buffer
>     - change the way to get bus configuration, which make it possible to
>             add parallel sensor support in the future(without mipi-phy driver).
> 
> ------------------
> 
> Changes in v7:
> - s/IPU3/RK_ISP1
> - s/correspond/corresponding
> - s/use/uses
> - s/docuemnt/document
> - Fix checkpatch errors (lines over 80 and SPDX)
> - Add TODO to improve docs
> - Migrate dphy specific code from
> drivers/media/platform/rockchip/isp1/mipi_dphy_sy.c
> to drivers/phy/rockchip/phy-rockchip-dphy.c
> - Drop support for rk3288
> - Drop support for dphy txrx
> - code styling and checkpatch fixes
> - fixed warning because of unknown entity type
> - fixed v4l2-compliance errors regarding rkisp1 formats, try formats
> and default values
> - fix typo riksp1/rkisp1
> - redesign: remove mipi/csi subdevice, sensors connect directly to the
> isp subdevice in the media topology now. As a consequence, remove the
> hack in mipidphy_g_mbus_config() where information from the sensor was
> being propagated through the topology.
> - From the old dphy:
>         * cache get_remote_sensor() in s_stream
>         * use V4L2_CID_PIXEL_RATE instead of V4L2_CID_LINK_FREQ
> - Replace stream state with a boolean
> - code styling and checkpatch fixes
> - fix stop_stream (return after calling stop, do not reenable the stream)
> - fix rkisp1_isp_sd_get_selection when V4L2_SUBDEV_FORMAT_TRY is set
> - fix get format in output (isp_sd->out_fmt.mbus_code was being ignored)
> - s/intput/input
> - remove #define sd_to_isp_sd(_sd), add a static inline as it will be
> reused by the capture
> - s/strlcpy/strscpy
> - sort out the locks in isp stats
> - code styling and checkpatch fixes
> - s/strlcpy/strscpy
> - s/strcpy/strscpy
> - fix config lsc error
> LSC data table size is 17x17, but when configuring data to ISP,
> should be aligned to 18x17. That means every last data of last
> line should be filled with 0, and not filled with the data of
> next line.
> - Update new ISP parameters immediately
> For those sub modules that have shadow registers in core isp, the
> new programing parameters would not be active if both
> CIF_ISP_CTRL_ISP_CFG_UPD_PERMANENT and CFG_UPD are not set. Now
> we configure CFG_UPD to force update the shadow registers when new
> ISP parameters are configured.
> - fix some ISP parameters config error
> Some ISP parameter config functions may override the old enable
> bit value, because the enable bits of these modules are in the
> same registers with parameters. So we should save the old enable
> bits firstly.
> - code styling and checkpatch fixes
> - s/strlcpy/strscpy
> - Fix v4l2-compliance issues:
>         * remove input ioctls
> media api can be used to define the topology, this input api is not
> required. Besides it, if an input is enumerated, v4l2-compliance is not
> happy with G_FMT returning the default colorspace instead of something
> more specific.
>         * return the pixelformat to the userspace
> G_/S_/TRY_ FORMAT should return a valid pixelformat to the user, even if
> the user gave an invalid one
>         * add missing default colorspace and ycbcr
>         * fix wrong pixformat in mp_fmts[] table
>         * add buf type check in s_/g_selection
>         * queue_setup - check sizes
>         * normalize bus_info name
>         * fix field any v4l2-compliance -s complain - set field none
>         when streaming
> - Fix compiling error: s/vidioc_enum_fmt_vid_cap_mplane/vidioc_enum_fmt_vid_cap
> - Replace stream state with a boolean
> The rkisp1_state enum consists only of 3 entries, where 1 is completely
> unused and the other two respectively mean not streaming or streaming.
> Replace it with a boolean called "streaming".
> - Simplify MI interrupt handling
> Rather than adding unnecessary indirection, just use stream index to
> handle MI interrupt enable/disable/clear, since the stream index matches
> the order of bits now, thanks to previous patch. While at it, remove
> some dead code.
> - code styling and checkpatch fixes
> - add link_validate: don't allow a link with bayer/non-bayer mismatch
> - VIDEO_ROCKCHIP_ISP1 selects VIDEOBUF2_VMALLOC
> - add PHY_ROCKCHIP_DPHY as a dependency for VIDEO_ROCKCHIP_ISP1
> - Fix compilation and runtime errors due to bitrotting
> The code has bit-rotten since March 2018, fix compilation errors.
> The new V4L2 async notifier API requires notifiers to be initialized by
> a call to v4l2_async_notifier_init() before being used, do so.
> - Add missing module device table
> - use clk_bulk framework
> - add missing notifiers cleanups
> - s/strlcpy/strscpy
> - normalize bus_info name
> - fix s_stream error path, stream_cnt wans't being decremented properly
> - use devm_platform_ioremap_resource() helper
> - s/deice/device
> - redesign: remove mipi/csi subdevice, sensors connect directly to the
> isp subdevice in the media topology now.
> - remove "saved_state" member from rkisp1_stream struct
> - Reverse the order of MIs
> - Simplify MI interrupt handling
> Rather than adding unnecessary indirection, just use stream index to
> handle MI interrupt enable/disable/clear, since the stream index matches
> the order of bits now, thanks to previous patch. While at it, remove
> some dead code.
> - code styling and checkpatch fixes
> - update document with new design and tested example
> - updated doc with new design and tested example
> - add phy properties
> - add ports
> - add phy-cells
> 
> Helen Koike (1):
>   MAINTAINERS: add entry for Rockchip ISP1 driver
> 
> Jacob Chen (9):
>   media: doc: add document for rkisp1 meta buffer format
>   media: rkisp1: add Rockchip MIPI Synopsys DPHY driver
>   media: rkisp1: add Rockchip ISP1 subdev driver
>   media: rkisp1: add ISP1 statistics driver
>   media: rkisp1: add ISP1 params driver
>   media: rkisp1: add capture device driver
>   media: rkisp1: add rockchip isp1 core driver
>   dt-bindings: Document the Rockchip ISP1 bindings
>   dt-bindings: Document the Rockchip MIPI RX D-PHY bindings
> 
> Jeffy Chen (1):
>   media: rkisp1: Add user space ABI definitions
> 
> Shunqian Zheng (3):
>   media: videodev2.h, v4l2-ioctl: add rkisp1 meta buffer format
>   arm64: dts: rockchip: add isp0 node for rk3399
>   arm64: dts: rockchip: add rx0 mipi-phy for rk3399
> 
>  .../bindings/media/rockchip-isp1.txt          |   71 +
>  .../bindings/media/rockchip-mipi-dphy.txt     |   38 +
>  Documentation/media/uapi/v4l/meta-formats.rst |    2 +
>  .../uapi/v4l/pixfmt-meta-rkisp1-params.rst    |   20 +
>  .../uapi/v4l/pixfmt-meta-rkisp1-stat.rst      |   18 +
>  MAINTAINERS                                   |    8 +
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi      |   36 +
>  drivers/media/platform/Kconfig                |   12 +
>  drivers/media/platform/Makefile               |    1 +
>  drivers/media/platform/rockchip/isp1/Makefile |    7 +
>  .../media/platform/rockchip/isp1/capture.c    | 1754 +++++++++++++++++
>  .../media/platform/rockchip/isp1/capture.h    |  164 ++
>  drivers/media/platform/rockchip/isp1/common.h |  101 +
>  drivers/media/platform/rockchip/isp1/dev.c    |  675 +++++++
>  drivers/media/platform/rockchip/isp1/dev.h    |   97 +
>  .../media/platform/rockchip/isp1/isp_params.c | 1604 +++++++++++++++
>  .../media/platform/rockchip/isp1/isp_params.h |   50 +
>  .../media/platform/rockchip/isp1/isp_stats.c  |  508 +++++
>  .../media/platform/rockchip/isp1/isp_stats.h  |   60 +
>  drivers/media/platform/rockchip/isp1/regs.c   |  223 +++
>  drivers/media/platform/rockchip/isp1/regs.h   | 1525 ++++++++++++++
>  drivers/media/platform/rockchip/isp1/rkisp1.c | 1286 ++++++++++++
>  drivers/media/platform/rockchip/isp1/rkisp1.h |  111 ++
>  drivers/media/v4l2-core/v4l2-ioctl.c          |    2 +
>  drivers/phy/rockchip/Kconfig                  |    8 +
>  drivers/phy/rockchip/Makefile                 |    1 +
>  drivers/phy/rockchip/phy-rockchip-dphy.c      |  412 ++++
>  include/uapi/linux/rkisp1-config.h            |  816 ++++++++
>  include/uapi/linux/videodev2.h                |    4 +
>  29 files changed, 9614 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/rockchip-isp1.txt
>  create mode 100644 Documentation/devicetree/bindings/media/rockchip-mipi-dphy.txt
>  create mode 100644 Documentation/media/uapi/v4l/pixfmt-meta-rkisp1-params.rst
>  create mode 100644 Documentation/media/uapi/v4l/pixfmt-meta-rkisp1-stat.rst
>  create mode 100644 drivers/media/platform/rockchip/isp1/Makefile
>  create mode 100644 drivers/media/platform/rockchip/isp1/capture.c
>  create mode 100644 drivers/media/platform/rockchip/isp1/capture.h
>  create mode 100644 drivers/media/platform/rockchip/isp1/common.h
>  create mode 100644 drivers/media/platform/rockchip/isp1/dev.c
>  create mode 100644 drivers/media/platform/rockchip/isp1/dev.h
>  create mode 100644 drivers/media/platform/rockchip/isp1/isp_params.c
>  create mode 100644 drivers/media/platform/rockchip/isp1/isp_params.h
>  create mode 100644 drivers/media/platform/rockchip/isp1/isp_stats.c
>  create mode 100644 drivers/media/platform/rockchip/isp1/isp_stats.h
>  create mode 100644 drivers/media/platform/rockchip/isp1/regs.c
>  create mode 100644 drivers/media/platform/rockchip/isp1/regs.h
>  create mode 100644 drivers/media/platform/rockchip/isp1/rkisp1.c
>  create mode 100644 drivers/media/platform/rockchip/isp1/rkisp1.h
>  create mode 100644 drivers/phy/rockchip/phy-rockchip-dphy.c
>  create mode 100644 include/uapi/linux/rkisp1-config.h
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux