From: Anson Huang <Anson.Huang@xxxxxxx> i.MX8MM has a thermal monitor unit (TMU) inside, it ONLY has one sensor for CPU, add support for temperature reading for CPU, cpu cooling is also added. This patch series is based on below i.MX SCU thermal patch series: https://patchwork.kernel.org/patch/11000821/ Anson Huang (4): dt-bindings: thermal: imx8mm-thermal: Add binding doc for i.MX8MM thermal: imx8mm: Add support for i.MX8MM thermal monitoring unit arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module arm64: dts: imx8mm: Add thermal zone support .../devicetree/bindings/thermal/imx8mm-thermal.txt | 15 +++ arch/arm64/boot/dts/freescale/imx8mm.dtsi | 43 +++++++ arch/arm64/configs/defconfig | 1 + drivers/thermal/Kconfig | 10 ++ drivers/thermal/Makefile | 1 + drivers/thermal/imx8mm_thermal.c | 134 +++++++++++++++++++++ 6 files changed, 204 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt create mode 100644 drivers/thermal/imx8mm_thermal.c -- 2.7.4
