On Wed, Jul 3, 2019 at 1:37 PM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
>
> Add the 'realtek,eee-led-mode-disable' property to disable EEE
> LED mode on Realtek PHYs that support it.
>
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> ---
> Changes in v2:
> - document 'realtek,eee-led-mode-disable' instead of
> 'realtek,enable-ssc' in the initial version
> ---
> .../devicetree/bindings/net/realtek.txt | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/realtek.txt
>
> diff --git a/Documentation/devicetree/bindings/net/realtek.txt b/Documentation/devicetree/bindings/net/realtek.txt
> new file mode 100644
> index 000000000000..63f7002fa704
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/realtek.txt
> @@ -0,0 +1,19 @@
> +Realtek PHY properties.
> +
> +This document describes properties of Realtek PHYs.
> +
> +Optional properties:
> +- realtek,eee-led-mode-disable: Disable EEE LED mode on this port.
> +
> +Example:
> +
> +mdio0 {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy: ethernet-phy@1 {
> + reg = <1>;
> + realtek,eee-led-mode-disable;
I think if we're going to have custom properties for phys, we should
have a compatible string to at least validate whether the custom
properties are even valid for the node.
Rob
